Difficulty

Easy

Steps

8

Time Required

                          10 - 15 minutes

Sections

3

  • Battery
  • 3 steps
  • Service Panel
  • 2 steps
  • DVD/CD Drive
  • 3 steps

Flags

0

  • BackHP ProBook 455 G1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the computer upside down on a flat side, so that you are seeing the underside of the laptop.
  • Before removing the battery, make sure that the computer is turned off and that the power cord is not plugged into the computer.

Turn the computer upside down on a flat side, so that you are seeing the underside of the laptop.

Before removing the battery, make sure that the computer is turned off and that the power cord is not plugged into the computer.

1024

Step 2

  • Slide the two battery release latches towards the center of the laptop to release the battery.

Slide the two battery release latches towards the center of the laptop to release the battery.

Step 3

  • Tilt the battery upward.
  • Remove it from the laptop.

Tilt the battery upward.

Remove it from the laptop.

Step 4

              Service Panel
  • Slide the two release latches that were mentioned in the battery removal process to release the service panel.

Slide the two release latches that were mentioned in the battery removal process to release the service panel.

Step 5

  • Slide the service panel toward you using your thumbs.
  • Lift it to remove the panel and reveal inner components of the computer.

Slide the service panel toward you using your thumbs.

Lift it to remove the panel and reveal inner components of the computer.

Step 6

              DVD/CD Drive
  • Using a Phillips P0 Screwdriver, remove the 6 millimeter screw that secures the DVD/CD drive to the computer.
  • It will be located in the upper left section of the computer, housed in a small square hole in the computer frame.
  • The Phillips head screwdriver is the screwdriver with a “+” shaped tip. P0 refers to the name/size of this particular Phillips head screwdriver.

Using a Phillips P0 Screwdriver, remove the 6 millimeter screw that secures the DVD/CD drive to the computer.

It will be located in the upper left section of the computer, housed in a small square hole in the computer frame.

The Phillips head screwdriver is the screwdriver with a “+” shaped tip. P0 refers to the name/size of this particular Phillips head screwdriver.

Step 7

  • Using the screwdriver, gently push the silver tab that the screw secured to the left to release the DVD/CD drive from the computer.

Using the screwdriver, gently push the silver tab that the screw secured to the left to release the DVD/CD drive from the computer.

Step 8

  • The DVD/CD drive will be extended from the side of the laptop. Slowly remove it from the computer.

The DVD/CD drive will be extended from the side of the laptop. Slowly remove it from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jennifer Sexton

Member since: 03/18/2018

649 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Baylor, Team S5-G1, Williams Spring 2018                        

                                                  Member of Baylor, Team S5-G1, Williams Spring 2018 



                    BU-WILLIAMS-S18S5G1                     


                                            3 Members                     


                                            6 Guides authored