Difficulty

Easy

Steps

5

Time Required

                          1 - 5 minutes

Sections

1

  • WiFi Card
  • 5 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP ProBook 4530s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Introduction
  • Start by flipping over the laptop onto its back.

Start by flipping over the laptop onto its back.

1024

Step 2

              Battery Removal
  • Push both switches inward. The battery should pop out a slight amount.
  • Pull out the battery.

Push both switches inward. The battery should pop out a slight amount.

Pull out the battery.

Step 3

              Back Panel Removal
  • Press on both of the battery switches then push on the back panel forward.
  • It should pop out slightly.
  • Lift and slide the panel off.

Press on both of the battery switches then push on the back panel forward.

It should pop out slightly.

Lift and slide the panel off.

Step 4

              Connector Removal
  • Locate the WiFi card outlined in red.
  • The golden connectors will need to be popped off. They are marked in blue.
  • Be very careful. If these connectors break, you will have to buy entirely new wires and connectors.
  • Use a nail, a flat-head screwdriver, anything that will be able to pop off the connector gently.

Locate the WiFi card outlined in red.

The golden connectors will need to be popped off. They are marked in blue.

Be very careful. If these connectors break, you will have to buy entirely new wires and connectors.

Use a nail, a flat-head screwdriver, anything that will be able to pop off the connector gently.

Step 5

              Card Removal
  • Remove the two screws that secure the card down.
  • The card should pop up at a 45 degree angle.
  • Pull the card straight out.

Remove the two screws that secure the card down.

The card should pop up at a 45 degree angle.

Pull the card straight out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    Drew Canada

Member since: 04/03/2018

1,360 Reputation

                                      4 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges