Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Battery
- 2 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP ProBook 450 G7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Requirements
- Philips no.1Plastic Picks/prying tools
Battery Safe mode
Before removing internal components, you must place the computer in Battery Safe mode. This mode avoids short-circuits or system malfunction by removing power from internal components.
To place the computer in Battery Safe mode, follow these steps:
With the computer turned off and AC adapter connected, press the following key and button combination:
Windows key + Backspace key + Power button.
After the computer powers off, disconnect the AC adapter.
To disengage Battery Safe mode, plug in the AC adapter and press the power button.
What you need
Step 1
Remove Back
- 7 P1 screws, green are removed the rest are retained
- Start with the hinge useing picks to slip inbetween the plastic and a spudger to pry apart
- The Ethernet jack is secured inside, do not try to remove
7 P1 screws, green are removed the rest are retained
Start with the hinge useing picks to slip inbetween the plastic and a spudger to pry apart
The Ethernet jack is secured inside, do not try to remove
1024
Step 2
Replace the battery
- Remove the two P1 Screws and lift the battery out. being carefull to apply even presure across the battery
Remove the two P1 Screws and lift the battery out. being carefull to apply even presure across the battery
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Conor Bone
Member since: 11/04/2020
140 Reputation
1 Guide authored
Badges:
6
+3 more badges