Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

1

  • Hard Drive
  • 8 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Probook 4425s

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive               
  • Turn the laptop off.
  • Flip the laptop over.

Turn the laptop off.

Flip the laptop over.

1024

Step 2

  • Remove the battery.

Remove the battery.

Step 3

  • Remove the four 3 mm Phillips head screws that secure the switch cover in place.

Remove the four 3 mm Phillips head screws that secure the switch cover in place.

Step 4

  • Flip over and open the laptop.
  • Remove the now loosened cover by grabbing both sides and sliding up.
  • Remove the four 3mm Phillips head black screws directly above the keyboard.

Flip over and open the laptop.

Remove the now loosened cover by grabbing both sides and sliding up.

Remove the four 3mm Phillips head black screws directly above the keyboard.

Step 5

  • Carefully remove the keyboard by sliding it up towards the screen of the computer in order to release the keyboard ribbon cable.

Carefully remove the keyboard by sliding it up towards the screen of the computer in order to release the keyboard ribbon cable.

Step 6

  • Remove the three black 3 mm Phillips head screws from the under the keyboard that are directly above the mouse pad.
  • Carefully remove the mouse pad.

Remove the three black 3 mm Phillips head screws from the under the keyboard that are directly above the mouse pad.

Carefully remove the mouse pad.

Step 7

  • The hard drive should be located on the right side of the laptop under the mouse pad.
  • Remove the two black 2 mm Phillips screws holding the hard drive in place on the left side, and remove the larger Phillips head screw on the right side of the hard drive.

The hard drive should be located on the right side of the laptop under the mouse pad.

Remove the two black 2 mm Phillips screws holding the hard drive in place on the left side, and remove the larger Phillips head screw on the right side of the hard drive.

Step 8

  • Remove the hard drive.

Remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Kaity                     

Member since: 09/28/2018

157 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       University of North Texas, Team S8-G6, Riccardelli Fall 2018                        

                                                  Member of University of North Texas, Team S8-G6, Riccardelli Fall 2018 



                    UNT-RICCARDELLI-F18S8G6                     


                                            3 Members                     


                                            3 Guides authored