Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

3

  • Battery
  • 2 steps
  • Backplate
  • 2 steps
  • Hard Disc Drive (HDD)
  • 4 steps

Flags

0

  • BackHP ProBook 440 G1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery               
  • Make sure the laptop is turned off before you start.
  • Push and hold the release tab on the right and left toward the center.

Make sure the laptop is turned off before you start.

Push and hold the release tab on the right and left toward the center.

1024

Step 2

  • Pull the battery out.

Pull the battery out.

Step 3

              Backplate               
  • Push and hold the release tabs on the right and left toward the center again.

Push and hold the release tabs on the right and left toward the center again.

Step 4

  • Slide the backplate off.

Slide the backplate off.

Step 5

              Hard Disc Drive (HDD)               
  • Locate the hard drive, opposite the battery across from the wireless card.

Locate the hard drive, opposite the battery across from the wireless card.

Step 6

  • Remove all four Phillips #00 screws that hold the hard drive in place.

Remove all four Phillips #00 screws that hold the hard drive in place.

Step 7

  • Lift up on the outer part of the hard drive.
  • Pull the hard drive out.

Lift up on the outer part of the hard drive.

Pull the hard drive out.

Step 8

  • Remove the four Phillips #00 screws holding the HDD in the HDD cover.
  • The HDD should slide out after all screws are removed.

Remove the four Phillips #00 screws holding the HDD in the HDD cover.

The HDD should slide out after all screws are removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Ethan A Courtney                     

Member since: 10/24/2018

851 Reputation

                                      7 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Purdue University Northwest, Team S1-G4, Hingst Fall 2018                        

                                                  Member of Purdue University Northwest, Team S1-G4, Hingst Fall 2018 



                    PNW-HINGST-F18S1G4                     


                                            1 Member                     


                                            7 Guides authored