Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Wireless Card
- 4 steps
Flags
0
BackHP Photosmart Premium C309g
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Wireless Card
- Open the top of the printer as shown.
- The wireless card is located on the left side of the printer if you are viewing it from the front.
Open the top of the printer as shown.
The wireless card is located on the left side of the printer if you are viewing it from the front.
1024
Step 2
- Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.
Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.
Step 3
- After unscrewing the screw, the left side will slide down revealing the wireless card.
After unscrewing the screw, the left side will slide down revealing the wireless card.
Step 4
- Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.
Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 3 other contributors
Charles
Member since: 10/23/2014
272 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Michigan Tech, Team 1-2, Lauer Fall 2014
Member of Michigan Tech, Team 1-2, Lauer Fall 2014
MTU-LAUER-F14S1G2
3 Members
5 Guides authored
