Difficulty
Moderate
Steps
7
Time Required
10 - 20 minutes
Sections
1
- Power Button
- 7 steps
Flags
0
BackHP Photosmart D110a
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Power Button
- Open the printer’s mouth by pulling the two mouth pieces down.
- Lift the flap covering the scanner. When you are finished, the printer should appear as shown.
Open the printer’s mouth by pulling the two mouth pieces down.
Lift the flap covering the scanner. When you are finished, the printer should appear as shown.
1024
Step 2
- Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.
- The clip may be damaged by applying too much force.
Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.
The clip may be damaged by applying too much force.
Step 3
- Remove the three screws from the top of the printer using a T9 screwdriver as shown.
- The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.
Remove the three screws from the top of the printer using a T9 screwdriver as shown.
The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.
Step 4
- Reach into the mouth of the printer and press the clip behind the power button to release the power button face.
Reach into the mouth of the printer and press the clip behind the power button to release the power button face.
Step 5
- A picture of the removed power button is provided to show the location of the clip that needs to be pressed.
- After pressing the clip, pull out the face of the power button by sliding it from the right to the left side.
A picture of the removed power button is provided to show the location of the clip that needs to be pressed.
After pressing the clip, pull out the face of the power button by sliding it from the right to the left side.
Step 6
- The power button face has a plastic holder that attaches the power button and the wireless button to the face plate using two slots.
- Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder.
- Remove the plastic holder from the face plate after the slots are loosened.
The power button face has a plastic holder that attaches the power button and the wireless button to the face plate using two slots.
Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder.
Remove the plastic holder from the face plate after the slots are loosened.
Step 7
- The plastic holder secures the power button by two slots.
- Using a spudger, push the holders inward to detach the button from the plastic holder.
The plastic holder secures the power button by two slots.
Using a spudger, push the holders inward to detach the button from the plastic holder.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 12 other contributors
Tim Wise
Member since: 04/01/2011
173 Reputation
7 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 10-38, Forte Spring 2011
Member of Cal Poly, Team 10-38, Forte Spring 2011
CPSU-FORTE-S11S10G38
5 Members
10 Guides authored
