Difficulty

Easy

Steps

10

Time Required

                          5 minutes

Sections

2

  • Batteries
  • 4 steps
  • Plastic Casing
  • 6 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackHP Photosmart 935

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Flip the camera over so the bottom of the camera is facing you.

Flip the camera over so the bottom of the camera is facing you.

1024

Step 2

  • Turn the mode dial to the OFF position.

Turn the mode dial to the OFF position.

Step 3

  • Slide the bottom cover in the direction of the arrow to open it.

Slide the bottom cover in the direction of the arrow to open it.

Step 4

  • Pull out the batteries.

Pull out the batteries.

Step 5

              Plastic Casing
  • Use a Phillips #00 screwdriver to remove the two 4.7 mm screws in the bottom of the plastic casing.

Use a Phillips #00 screwdriver to remove the two 4.7 mm screws in the bottom of the plastic casing.

Step 6

  • Remove the four 4.7 mm screws on the left side of the camera.

Remove the four 4.7 mm screws on the left side of the camera.

Step 7

  • Remove the four 4.7 mm screws on the opposite side of the camera.

Remove the four 4.7 mm screws on the opposite side of the camera.

Step 8

  • Use your thumbs to pry the case apart.
  • It is easiest to pry the case apart if you start at the bottom.
  • The case should come apart with minimal effort. If it doesn’t, you can use a spudger or plastic opening tool to pry it open.

Use your thumbs to pry the case apart.

It is easiest to pry the case apart if you start at the bottom.

The case should come apart with minimal effort. If it doesn’t, you can use a spudger or plastic opening tool to pry it open.

Step 9

  • This step requires a significant amount of force.
  • Pull the bottom half of the inner camera out of the case by half an inch. This may be difficult.

This step requires a significant amount of force.

Pull the bottom half of the inner camera out of the case by half an inch. This may be difficult.

Step 10

  • While pulling the camera out of the case, note the small soft plastic cover on the side. This cover will detach from the rest of the device.
  • Once the bottom of the inner camera is pulled out, pull the device out completely.
  • Use a firm grasp when removing the device from the case for stability and control.

While pulling the camera out of the case, note the small soft plastic cover on the side. This cover will detach from the rest of the device.

Once the bottom of the inner camera is pulled out, pull the device out completely.

Use a firm grasp when removing the device from the case for stability and control.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 9 other contributors 


                    Clay Young

Member since: 04/04/2012

227 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team 15-13, Forte Spring 2012                        

                                                  Member of Cal Poly, Team 15-13, Forte Spring 2012 



                    CPSU-FORTE-S12S15G13                     


                                            5 Members                     


                                            10 Guides authored