Hp Pavillion G7 2235Dx Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 15 minutes

Sections

Keyboard
7 steps

Flags

BackHP Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Keyboard

Before beginning, make sure the computer is turned off and the charger is disconnected.
Flip the computer over, so that the bottom is facing up.

Before beginning, make sure the computer is turned off and the charger is disconnected.

Flip the computer over, so that the bottom is facing up.

1024

Step 2

To remove the battery, slide the battery switch to the left.

To remove the battery, slide the battery switch to the left.

Step 3

Using a PH Screwdriver, remove the three 7.25mm screws located on the bottom panel.
After removing all screws, remove the panel by sliding down.

Using a PH Screwdriver, remove the three 7.25mm screws located on the bottom panel.

After removing all screws, remove the panel by sliding down.

Step 4

Using a PH screwdriver, remove the screw adjacent to the white labels.
There is a keyboard icon next to the screw

Using a PH screwdriver, remove the screw adjacent to the white labels.

There is a keyboard icon next to the screw

Step 5

Flip the laptop over, and open it.

Flip the laptop over, and open it.

Step 6

Using a plastic spudger, pry beneath the keyboard near the “delete” key, and pop the keyboard up from the laptop.
From the open gap, continue to pry around the perimeter of the keyboard, separating it from the laptop.

Using a plastic spudger, pry beneath the keyboard near the “delete” key, and pop the keyboard up from the laptop.

From the open gap, continue to pry around the perimeter of the keyboard, separating it from the laptop.

Step 7

Using both hands, carefully lift the keyboard off of the laptop.
There may be a ribbon attached. If so, gently pull the ribbon cable up and away from the connector.

Using both hands, carefully lift the keyboard off of the laptop.

There may be a ribbon attached. If so, gently pull the ribbon cable up and away from the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Bre'Anna Sanders

Member since: 10/11/2016

68 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       USF Tampa, Team 1-7, Leahy Fall 2016                        

                                                  Member of USF Tampa, Team 1-7, Leahy Fall 2016 



                    USFT-LEAHY-F16S1G7                     


                                            3 Members                     


                                            5 Guides authored

What you need#

Team#

What you need

Team