Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Battery
  • 2 steps
  • Keyboard
  • 4 steps

Flags

0

  • BackHP Pavillion dm1-3010nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the device over, so that the bottom cover is exposed.
  • Slide the black locking mechanism into its unlock position.

Flip the device over, so that the bottom cover is exposed.

Slide the black locking mechanism into its unlock position.

1024

Step 2

  • After unlocking the mechanism, slide the battery out of its compartment.

After unlocking the mechanism, slide the battery out of its compartment.

Step 3

              Keyboard
  • Remove the black bottom cover by using your fingernails or a thin flat tool.

Remove the black bottom cover by using your fingernails or a thin flat tool.

Step 4

  • Use the Phillips #0 screwdriver to remove three 5mm screws securing the keyboard.
  • The screws to be removed are circled in red in the picture provided.
  • Make sure to place the screws somewhere safe like on top of a magnet.

Use the Phillips #0 screwdriver to remove three 5mm screws securing the keyboard.

The screws to be removed are circled in red in the picture provided.

Make sure to place the screws somewhere safe like on top of a magnet.

Step 5

  • Flip the laptop so that they keyboard is facing you.
  • Use a thin and flat metal to carefully lift up the top side of the keyboard and separate it from the top cover.

Flip the laptop so that they keyboard is facing you.

Use a thin and flat metal to carefully lift up the top side of the keyboard and separate it from the top cover.

Step 6

  • Now you will see the keyboard cable connector attached to a locking tab.
  • Lift up the locking tab with a thin and flat screwdriver or your fingernail.
  • The locking tab will open up at a 90 degree angle.
  • Pull the keyboard cable from the connector.

Now you will see the keyboard cable connector attached to a locking tab.

Lift up the locking tab with a thin and flat screwdriver or your fingernail.

The locking tab will open up at a 90 degree angle.

Pull the keyboard cable from the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Rosalia Olga Dupont Ayala

Member since: 10/22/2018

210 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UC Davis, Team S7-G1, Lore Fall 2018                        

                                                  Member of UC Davis, Team S7-G1, Lore Fall 2018 



                    UCD-LORE-F18S7G1                     


                                            3 Members                     


                                            4 Guides authored