Difficulty
Easy
Steps
5
Time Required
8 minutes
Sections
2
- Battery
- 2 steps
- Cooling Fan
- 3 steps
Flags
0
BackHP Pavillion dm1-3010nr
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Flip the device over, so that the bottom cover is exposed.
- Slide the black locking mechanism into its unlock position.
Flip the device over, so that the bottom cover is exposed.
Slide the black locking mechanism into its unlock position.
1024
Step 2
- After unlocking the mechanism, slide the battery out of its compartment.
After unlocking the mechanism, slide the battery out of its compartment.
Step 3
Cooling Fan
- With the battery removed, the bottom cover can be opened with your hand.
With the battery removed, the bottom cover can be opened with your hand.
Step 4
- Use a screwdriver from your iFixit Toolkit to remove the two 5mm Phillips #0 screws shown in each picture.
- Use tweezers to carefully remove the fan’s power cable from the motherboard. The cable can be seen in the second picture.
Use a screwdriver from your iFixit Toolkit to remove the two 5mm Phillips #0 screws shown in each picture.
Use tweezers to carefully remove the fan’s power cable from the motherboard. The cable can be seen in the second picture.
Step 5
- After removing the screws and unplugging the wire, remove the fan.
After removing the screws and unplugging the wire, remove the fan.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Amitpal Gill
Member since: 10/22/2018
375 Reputation
3 Guides authored
Badges:
7
+4 more badges
Team
UC Davis, Team S7-G1, Lore Fall 2018
Member of UC Davis, Team S7-G1, Lore Fall 2018
UCD-LORE-F18S7G1
3 Members
4 Guides authored