Difficulty

Very easy

Steps

5

Time Required

                          3 - 7 minutes

Sections

2

  • Battery
  • 3 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackHP Pavilion zv5000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Make sure that your device is properly shut down and unplugged from any outlet.
  • Flip Pavilion over so that the bottom faces up and locate the battery in the bottom left corner.

Make sure that your device is properly shut down and unplugged from any outlet.

Flip Pavilion over so that the bottom faces up and locate the battery in the bottom left corner.

1024

Step 2

  • Press and slide up the battery release tab with your thumb until the battery pops out of place.

Press and slide up the battery release tab with your thumb until the battery pops out of place.

Step 3

  • Using two fingers, pry the rest of the battery out of the socket.

Using two fingers, pry the rest of the battery out of the socket.

Step 4

              Hard Drive
  • Make sure that the Pavilion is completely powered down and unplugged. Failure to do so may result in an electrical shock.
  • Using the Phillips #0 screwdriver, unscrew the two Phillips PM 2.5X6.0mm screws.
  • The two screws do not come out of the hard drive assembly, they simply disconnect the assembly from the laptop.

Make sure that the Pavilion is completely powered down and unplugged. Failure to do so may result in an electrical shock.

Using the Phillips #0 screwdriver, unscrew the two Phillips PM 2.5X6.0mm screws.

The two screws do not come out of the hard drive assembly, they simply disconnect the assembly from the laptop.

Step 5

  • Place the spudger underneath the cover of the hard drive and push up gently until the hard drive pops out of place.
  • Completely remove the hard drive from its socket.
  • If the plastic spudger is not sturdy enough to pop the hard drive out of place, try carefully using the metal spudger.

Place the spudger underneath the cover of the hard drive and push up gently until the hard drive pops out of place.

Completely remove the hard drive from its socket.

If the plastic spudger is not sturdy enough to pop the hard drive out of place, try carefully using the metal spudger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Eliza Marks

Member since: 10/18/2016

649 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team 4-6, Catania Fall 2016                        

                                                  Member of UMass Dartmouth, Team 4-6, Catania Fall 2016 



                    UMASSD-CATANIA-F16S4G6                     


                                            3 Members                     


                                            5 Guides authored

Danny Morris - Apr 24, 2018

Reply

My hp pavilion zx5000 has a blue screen and i am unable to do anything. O. S. Is Windows.

Please help