Difficulty

Easy

Steps

34

Time Required

                          20 - 25 minutes

Sections

9

  • Battery
  • 2 steps
  • RAM
  • 3 steps
  • WiFi Card Cables
  • 2 steps
  • CD/Optical Drive
  • 3 steps
  • Keyboard
  • 4 steps
  • Switch Cover
  • 3 steps
  • Screen
  • 5 steps
  • Top Cover
  • 9 steps
  • USB Module
  • 3 steps

Flags

0

  • BackHP Pavilion zd8000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Slide the battery release latch towards you.

Slide the battery release latch towards you.

1024

Step 2

  • Pull up on the battery to remove it.

Pull up on the battery to remove it.

Step 3

              RAM
  • Loosen the Phillips screw labeled ‘ram’ and lift the cover.

Loosen the Phillips screw labeled ‘ram’ and lift the cover.

Step 4

  • Locate the green RAM card and find the metal tabs securing the card.
  • Push outwards on the two tabs to release the card.

Locate the green RAM card and find the metal tabs securing the card.

Push outwards on the two tabs to release the card.

Step 5

  • Carefully slide the card out at an upward angle away from the slot.

Carefully slide the card out at an upward angle away from the slot.

Step 6

              WiFi Card Cables
  • Unscrew the four 8mm Philips screws marked with an icon resembling a stacks of discs.
  • Lift the cover from the right to remove it.

Unscrew the four 8mm Philips screws marked with an icon resembling a stacks of discs.

Lift the cover from the right to remove it.

Step 7

  • Use tweezers to detach the grey and black cables connected to the green WiFi card.

Use tweezers to detach the grey and black cables connected to the green WiFi card.

Step 8

              CD/Optical Drive
  • Remove the 8mm Philips screw located between the hard drive and the WiFi card.

Remove the 8mm Philips screw located between the hard drive and the WiFi card.

Step 9

  • Turn the laptop 90 degrees clockwise so you are facing the CD drive.
  • Unbend a paperclip and insert the end into the small hole by the eject button to cause the tray to pop out towards you.

Turn the laptop 90 degrees clockwise so you are facing the CD drive.

Unbend a paperclip and insert the end into the small hole by the eject button to cause the tray to pop out towards you.

Step 10

  • Gently pull the tray away from the laptop and the rest of the optical drive will follow.

Gently pull the tray away from the laptop and the rest of the optical drive will follow.

Step 11

              Keyboard
  • Remove the two 8mm Philips screws marked “K” on the bottom of the laptop.

Remove the two 8mm Philips screws marked “K” on the bottom of the laptop.

Step 12

  • Flip the laptop over and open the screen.
  • Push up on the four latches located at the top of the keyboard with the spudger to release them.

Flip the laptop over and open the screen.

Push up on the four latches located at the top of the keyboard with the spudger to release them.

Step 13

  • Lift the keyboard carefully because it is attached to the motherboard by a ribbon cable.
  • Lift the top of the keyboard towards you. Then, while keeping the keyboard at an angle, lift it towards the display.

Lift the keyboard carefully because it is attached to the motherboard by a ribbon cable.

Lift the top of the keyboard towards you. Then, while keeping the keyboard at an angle, lift it towards the display.

Step 14

  • Rotate the keyboard so that the bottom is visible.
  • With the keyboard lifted, locate the blue-striped tab on the underside of the black ribbon cable.
  • Pull the tab towards you to release the keyboard from the laptop.

Rotate the keyboard so that the bottom is visible.

With the keyboard lifted, locate the blue-striped tab on the underside of the black ribbon cable.

Pull the tab towards you to release the keyboard from the laptop.

Step 15

              Switch Cover
  • Place the laptop face-down and rotate it 180 degrees so the vents are facing you.
  • Remove the five 8mm Philips screws. Three are on the black base and two are near the hinges.

Place the laptop face-down and rotate it 180 degrees so the vents are facing you.

Remove the five 8mm Philips screws. Three are on the black base and two are near the hinges.

Step 16

  • Flip the laptop over.
  • Fully open the laptop.

Flip the laptop over.

Fully open the laptop.

Step 17

  • Rotate it so the display is on your right and the keyboard is on your left.
  • Lift the switch cover firmly but slowly so you do not snap it.
  • Lift the switch cover carefully from one end while sliding the spudger between the switch cover and the laptop to separate them.
  • The switch cover should easily separate from the laptop as you run the spudger through.

Rotate it so the display is on your right and the keyboard is on your left.

Lift the switch cover firmly but slowly so you do not snap it.

Lift the switch cover carefully from one end while sliding the spudger between the switch cover and the laptop to separate them.

The switch cover should easily separate from the laptop as you run the spudger through.

Step 18

              Screen
  • Close the lid and rotate the laptop so that the vents are facing you.
  • Unscrew the two 8mm Philips screws below the hinges.

Close the lid and rotate the laptop so that the vents are facing you.

Unscrew the two 8mm Philips screws below the hinges.

Step 19

  • Carefully rotate the laptop 90 degrees counter-clockwise and open the screen.
  • Pull on the black tab with the HP service sticker to unplug the display from the motherboard.

Carefully rotate the laptop 90 degrees counter-clockwise and open the screen.

Pull on the black tab with the HP service sticker to unplug the display from the motherboard.

Step 20

  • Using tweezers, remove the black cable from the hole leading to the WiFi enclosure.
  • Pull gently to remove the black and grey cables from the case.
  • Check the surface beneath the laptop to ensure the cables do not catch on anything when you flip the laptop over.

Using tweezers, remove the black cable from the hole leading to the WiFi enclosure.

Pull gently to remove the black and grey cables from the case.

Check the surface beneath the laptop to ensure the cables do not catch on anything when you flip the laptop over.

Step 21

  • Using tweezers, pull the black cable towards the display and through the hole in the casing.

Using tweezers, pull the black cable towards the display and through the hole in the casing.

Step 22

  • Unscrew the two 8mm Philips screws that attach the hinge to the laptop’s display.
  • Lift the screen upwards to detach it from the laptop.

Unscrew the two 8mm Philips screws that attach the hinge to the laptop’s display.

Lift the screen upwards to detach it from the laptop.

Step 23

              Top Cover
  • With the laptop face-down, remove the eleven 8mm Philips screws.

With the laptop face-down, remove the eleven 8mm Philips screws.

Step 24

  • Rotate the laptop 180 degrees so the vents are facing you.
  • Unscrew the four 3mm Philips screws below the vents.

Rotate the laptop 180 degrees so the vents are facing you.

Unscrew the four 3mm Philips screws below the vents.

Step 25

  • Rotate the laptop 90 degrees counter-clockwise.
  • Unscrew the two 3mm Philips screws from the optical drive bay.

Rotate the laptop 90 degrees counter-clockwise.

Unscrew the two 3mm Philips screws from the optical drive bay.

Step 26

  • Flip the laptop over so it is face-up with the trackpad closest to you.
  • Locate the ribbon cable directly above the track pad.
  • Find the black latch at the end of the ribbon cable and unlatch it with a spudger to release it.

Flip the laptop over so it is face-up with the trackpad closest to you.

Locate the ribbon cable directly above the track pad.

Find the black latch at the end of the ribbon cable and unlatch it with a spudger to release it.

Step 27

  • Find the ribbon cable on the LED board located at the top of the laptop.
  • You will notice that the ribbon cable is connected to two levels - you will be dealing with the one on the lower level.
  • Find the black latch at the end of the ribbon cable and unlatch it with a spudger to release it.

Find the ribbon cable on the LED board located at the top of the laptop.

You will notice that the ribbon cable is connected to two levels - you will be dealing with the one on the lower level.

Step 28

  • Locate the white connector attached to a red and black cable to the right of the LED board.
  • Using tweezers, pull the white connector away from you.

Locate the white connector attached to a red and black cable to the right of the LED board.

Using tweezers, pull the white connector away from you.

Step 29

  • Unscrew the four 8mm Philips screws from the top cover.

Unscrew the four 8mm Philips screws from the top cover.

Step 30

  • Rotate the computer 90 degrees clockwise and insert the spudger at the seam above the card reader.
  • While lifting the front end of the top cover, slide the spudger across the seam.
  • When you have reached the firewire port, it should click open.

Rotate the computer 90 degrees clockwise and insert the spudger at the seam above the card reader.

While lifting the front end of the top cover, slide the spudger across the seam.

When you have reached the firewire port, it should click open.

Step 31

  • Lift the top cover from the left side to remove it completely.

Lift the top cover from the left side to remove it completely.

Step 32

              USB Module
  • Rotate the laptop 90 degrees counter-clockwise
  • Locate the USB Module
  • Grip the yellow cable cover and pull it to the right to release it.

Rotate the laptop 90 degrees counter-clockwise

Locate the USB Module

Grip the yellow cable cover and pull it to the right to release it.

Step 33

  • Unscrew the 6mm Philips screw connecting the USB module to the fan.

Unscrew the 6mm Philips screw connecting the USB module to the fan.

Step 34

  • Pull the module to the right and lift it out to release it.

Pull the module to the right and lift it out to release it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Allie Menard

Member since: 04/12/2011

820 Reputation

                                      13 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 24-56, Amido Spring 2011                        

                                                  Member of Cal Poly, Team 24-56, Amido Spring 2011 



                    CPSU-AMIDO-S11S24G56                     


                                            4 Members                     


                                            13 Guides authored