Hp Pavilion X360 M3 U103Dx Hp Pavilion X360 M3 U103Dx Keyboard Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

• Keyboard
• 6 steps

Flags

0

• BackHP Pavilion x360 m3-u103dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This task requires patience and attention to detail.

What you need

Step 1

              Keyboard               

• Power off Device.
• Working device while it is powered on may cause damage to laptop or electric shock.

Power off Device.

Working device while it is powered on may cause damage to laptop or electric shock.

1024

Step 2

• Flip over laptop
• Remove the rubber foot with a Metal Spudger

Flip over laptop

Remove the rubber foot with a Metal Spudger

Step 3

• Remove the screws from the bottom of the laptop using a Phillips 00 Screwdriver.
• 5 Phillips 2.4 x 5.7 mm screws.
• 5 Phillips 2.0 x 5.0 mm screws.
• Make sure to keep different screw types separated.

Remove the screws from the bottom of the laptop using a Phillips 00 Screwdriver.

5 Phillips 2.4 x 5.7 mm screws.

5 Phillips 2.0 x 5.0 mm screws.

Make sure to keep different screw types separated.

Step 4

• Flip the laptop over to screen and keyboard side.
• Using a Metal Spudger pop open keyboard from base of laptop.
• Be cautious of three wires on the inside of the keyboard connecting it to the motherboard.

Flip the laptop over to screen and keyboard side.

Using a Metal Spudger pop open keyboard from base of laptop.

Be cautious of three wires on the inside of the keyboard connecting it to the motherboard.

Step 5

• Disconnect the three connected cable ribbons connected to the motherboard by gently pulling them out of their connectors.

Disconnect the three connected cable ribbons connected to the motherboard by gently pulling them out of their connectors.

Step 6

• After ribbon cables have been disconnected, carefully lift up keyboard to disconnect from base of laptop.

After ribbon cables have been disconnected, carefully lift up keyboard to disconnect from base of laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Teresita Aragon                     

Member since: 01/17/2019

566 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Eastern Washington University, Team S2-G6, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G6, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G6                     


                                            4 Members                     


                                            3 Guides authored                     

k.kolish2493 - Aug 19, 2020

Reply

what if it is just one key that isnt working. my enter key doesn’t work and it’s very frustrating