Hp Pavilion X360 M3 U103Dx Battery Replacement Repair Guide

Difficulty

Easy

Steps

7

Time Required

                          15 minutes            

Sections

1

• Battery
• 7 steps

Flags

0

• BackHP Pavilion x360 m3-u103dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

This task requires patience and attention to detail.

What you need

Step 1

              Battery               

• Power off device.
• Flip the laptop over.
• Working on your device while its powered on may cause damage to your device.

Power off device.

Flip the laptop over.

Working on your device while its powered on may cause damage to your device.

1024

Step 2

• Remove rubber foot closest to computer hinge with a Metal Spudger.

Remove rubber foot closest to computer hinge with a Metal Spudger.

Step 3

• Remove all screws from base using a Phillips head 00 screwdriver.
• 5 Phillip 2.4 x 5.7 mm screws.
• 5 Phillips 2.8 x 5.0 mm screws.

Remove all screws from base using a Phillips head 00 screwdriver.

5 Phillip 2.4 x 5.7 mm screws.

5 Phillips 2.8 x 5.0 mm screws.

Step 4

• Open computer and pry open keyboard panel using the Metal Spudger. Apply little pressure then increase until keyboard pops away from motherboard.
• Be careful not to pull or disconnect ribbon cables first.

Open computer and pry open keyboard panel using the Metal Spudger. Apply little pressure then increase until keyboard pops away from motherboard.

Be careful not to pull or disconnect ribbon cables first.

Step 5

• Gently lift the keyboard on the mouse pad side, but do not remove.
• The keyboard is still connected by three ribbon cables.
• Remove three connected ribbon wires connecting keyboard to frame by gently disconnecting them from the motherboard.

Gently lift the keyboard on the mouse pad side, but do not remove.

The keyboard is still connected by three ribbon cables.

Remove three connected ribbon wires connecting keyboard to frame by gently disconnecting them from the motherboard.

Step 6

• Use a Phillips #00 screwdriver to remove six screws around the battery.
• 6 Phillips 2.0 x 4.6 mm screws.

Use a Phillips #00 screwdriver to remove six screws around the battery.

6 Phillips 2.0 x 4.6 mm screws.

Step 7

• Gently lift the battery up and away from the casing.
• Carefully remove the battery from its connecting port.

Gently lift the battery up and away from the casing.

Carefully remove the battery from its connecting port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Meaghan Hyatt                     

Member since: 01/17/2019

355 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Eastern Washington University, Team S2-G6, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G6, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G6                     


                                            4 Members                     


                                            3 Guides authored                     

PAPISSS PH - Jul 5, 2020

Reply

Can i use the laptop even without a battery??