Difficulty

Easy

Steps

6

Time Required

                          10 minutes

Sections

1

  • RAM
  • 6 steps

Flags

0

  • BackHP Pavilion x360 Convertible 14-dw1025nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

The RAM controls functions such as loading applications, browsing the internet, and switching between these tasks.

The replacement of the RAM involves a minimal amount of steps that repeat once for the two sticks of RAM within the laptop. The only tools needed for the replacement are plastic opening tools, a Phillips #0 screwdriver, Phillips #1 screwdriver, and a spudger.

What you need

Step 1

              RAM
  • Turn off the device and set it upside down. Orient the hinges away from you.
  • Wedge the opening pick under the grip. Lift the end of the grip.
  • Pull the grip off all the way. Repeat for the second grip.

Turn off the device and set it upside down. Orient the hinges away from you.

Wedge the opening pick under the grip. Lift the end of the grip.

Pull the grip off all the way. Repeat for the second grip.

1024

Step 2

  • Use PH0 to remove the 3mm screw from the center bottom.
  • Use PH1 to remove the 6mm screw from all four corners.

Use PH0 to remove the 3mm screw from the center bottom.

Use PH1 to remove the 6mm screw from all four corners.

Step 3

  • Use the opening pick to separate the back panel from the device.
  • Begin near the hinge and carefully follow the perimeter until you have taken the pick around all four sides.
  • The back panel will come loose once the pick has been around the whole edge of the device.
  • Lift the panel off.

Use the opening pick to separate the back panel from the device.

Begin near the hinge and carefully follow the perimeter until you have taken the pick around all four sides.

The back panel will come loose once the pick has been around the whole edge of the device.

Lift the panel off.

Step 4

  • Pinch and lift the black and gray plate labeled with “WLAN.”

Pinch and lift the black and gray plate labeled with “WLAN.”

Step 5

  • Use the spudger to unhook the locks on each side of the green RAM stick.
  • The locks will be unhooked by pushing them gently away from the RAM sticks.

Use the spudger to unhook the locks on each side of the green RAM stick.

The locks will be unhooked by pushing them gently away from the RAM sticks.

Step 6

  • Gently pull the RAM stick up and out to remove.
  • Repeat the previous two steps to remove the second RAM strip.

Gently pull the RAM stick up and out to remove.

Repeat the previous two steps to remove the second RAM strip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    Amber Norton

Member since: 09/14/2022

661 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Western Carolina University, Team 1-3, Virtue Fall 2022                        

                                                  Member of Western Carolina University, Team 1-3, Virtue Fall 2022 



                    WCU-VIRTUE-F22S1G3                     


                                            4 Members                     


                                            5 Guides authored