Difficulty

Moderate

Steps

8

Time Required

                          25 minutes

Sections

4

  • Keyboard Panel
  • 2 steps
  • Battery
  • 2 steps
  • Motherboard
  • 3 steps
  • RAM
  • 1 step

Flags

0

  • BackHP Pavilion x360 15t-br000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Signs of a dysfunctional RAM stick can be the slowing of your operating system as well as crashes during computer startup. By replacing the RAM, the operating system’s efficiency can be dramatically increased and these problems can be resolved.

Remember to shut down the computer before beginning the replacement.

What you need

Step 1

              Keyboard Panel
  • Remove the covers to access the screws attached to the back cover of the device.
  • Remove six 3mm screws using the Phillips #0 screwdriver.

Remove the covers to access the screws attached to the back cover of the device.

Remove six 3mm screws using the Phillips #0 screwdriver.

1024

Step 2

  • Use a metal spudger to loosen the four corners of the keyboard panel. The corner is circled red as shown in the first image.
  • Disconnect the keyboard panel cables under the upper case.
  • Remove the keyboard panel from the device.

Use a metal spudger to loosen the four corners of the keyboard panel. The corner is circled red as shown in the first image.

Disconnect the keyboard panel cables under the upper case.

Remove the keyboard panel from the device.

Step 3

              Battery
  • Disconnect the battery cable from the device.

Disconnect the battery cable from the device.

Step 4

  • Remove the seven Phillips #0 4.5 mm screws.
  • Remove the battery from the device.

Remove the seven Phillips #0 4.5 mm screws.

Remove the battery from the device.

Step 5

              Motherboard
  • Disconnect the five cable connections to the motherboard.

Disconnect the five cable connections to the motherboard.

Step 6

  • Unscrew the nine 3mm mounting screws on the motherboard using the Phillips #0 screwdriver.

Unscrew the nine 3mm mounting screws on the motherboard using the Phillips #0 screwdriver.

Step 7

  • Lift the motherboard carefully then remove the motherboard.

Lift the motherboard carefully then remove the motherboard.

Step 8

              RAM
  • Turn over motherboard and remove the RAM carefully from motherboard.

Turn over motherboard and remove the RAM carefully from motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Daniel R Rathbun

Member since: 09/21/2021

241 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       The Citadel Military College of South Carolina, Team 3-22, Eggleston Fall 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team 3-22, Eggleston Fall 2021 



                    CMCSC-EGGLESTON-F21S3G22                     


                                            2 Members                     


                                            3 Guides authored