Difficulty
Moderate
Steps
16
Time Required
25 - 50 minutes
Sections
4
- Back Cover
- 5 steps
- Battery
- 2 steps
- Heat Sink and Fan
- 4 steps
- Keyboard
- 5 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackHP Pavilion x360 14m-cd0005dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The keyboard is an essential part of any laptop. When replacing a keyboard, there may be some necessary software updates. Also, be aware that there are many wires to the keyboard; failing to replace a single cable can cause the keyboard to fail to work entirely. Neglecting the replacement of a keyboard may result in the system failing to recognize key inputs consistently.
What you need
Step 1
Back Cover
- Turn off and shut down the computer.
- Disconnect the power adapter and all external devices connected to the computer.
- Do not work with the device powered on. It may result in bodily harm through electric shock.
Turn off and shut down the computer.
Disconnect the power adapter and all external devices connected to the computer.
Do not work with the device powered on. It may result in bodily harm through electric shock.
1024
Step 2
- Flip the device with the backplate up and with the hinge on the far side.
Flip the device with the backplate up and with the hinge on the far side.
Step 3
- Use the opening tool to remove the rubber feet attached to the bottom of the device.
Use the opening tool to remove the rubber feet attached to the bottom of the device.
Step 4
- Remove all screws located on the bottom of the device:
- Two Phillips #0 7.0mm screws
- Three Phillips #00 4.5mm screws
- Make sure to keep track of all screws removed from the device.
Remove all screws located on the bottom of the device:
Two Phillips #0 7.0mm screws
Three Phillips #00 4.5mm screws
Make sure to keep track of all screws removed from the device.
Step 5
- Using the opening tool, carefully remove the bottom cover from the device.
Using the opening tool, carefully remove the bottom cover from the device.
Step 6
Battery
- Use a #00 Phillips screwdriver to remove:
- Six 2.5 mm screws
Use a #00 Phillips screwdriver to remove:
Six 2.5 mm screws
Step 7
- Carefully lift from the base and remove the battery.
Carefully lift from the base and remove the battery.
Step 8
Heat Sink and Fan
- Remove the tape that secures the fan to the computer.
Remove the tape that secures the fan to the computer.
Step 9
- Find the fan cable
- Use the Reverse Tweezers to unplug the fan cable
Find the fan cable
Use the Reverse Tweezers to unplug the fan cable
Step 10
- Remove all screws securing the fan to the device:
- Two Phillips #00 4.5mm screws
- Four Phillips #00 4.5mm screws
Remove all screws securing the fan to the device:
Two Phillips #00 4.5mm screws
Four Phillips #00 4.5mm screws
Step 11
- Lift and remove the fan and heat sink from the device.
- When removing the fan, there will be an adhesive strip attached to the bottom. There may be some resistance as the device is being removed. Use a spudger to hold the adhesive down during removal.
Lift and remove the fan and heat sink from the device.
When removing the fan, there will be an adhesive strip attached to the bottom. There may be some resistance as the device is being removed. Use a spudger to hold the adhesive down during removal.
Step 12
Keyboard
- Remove all screws securing the hinges to the device:
- Four Phillips #0 4.5mm screws
- After removing the hinge screws, it can be harder to turn the laptop. Be sure to not force it, but pressing on the hinge itself to make it move may help when manipulating the screen.
Remove all screws securing the hinges to the device:
Four Phillips #0 4.5mm screws
After removing the hinge screws, it can be harder to turn the laptop. Be sure to not force it, but pressing on the hinge itself to make it move may help when manipulating the screen.
Step 13
- Grab the ribbon wires by the edge of the socket and pull to remove them from the motherboard.
Grab the ribbon wires by the edge of the socket and pull to remove them from the motherboard.
Step 14
- Rotate the screen backwards until only the keyboard is visible.
Rotate the screen backwards until only the keyboard is visible.
Step 15
- Run an Opening Tool along the edge of the device.
- Pull the plastic keyboard up and away from the base of the laptop.
- There is adhesive attaching the keyboard to the base of the laptop. Continue to pull the keyboard up and out; ignore the resistance.
- Pull up on the metal casing of the keyboard below the keyboard’s surface once a hand can adequately fit under the gap.
Run an Opening Tool along the edge of the device.
Pull the plastic keyboard up and away from the base of the laptop.
There is adhesive attaching the keyboard to the base of the laptop. Continue to pull the keyboard up and out; ignore the resistance.
Pull up on the metal casing of the keyboard below the keyboard’s surface once a hand can adequately fit under the gap.
Step 16
- Gently raise the keyboard up and keep pulling to remove it from the base housing.
- Do not pull just the top casing off. It is brittle and it may break. Ensure that the opening tool is beneath the keyboard in its entirety.
Gently raise the keyboard up and keep pulling to remove it from the base housing.
Do not pull just the top casing off. It is brittle and it may break. Ensure that the opening tool is beneath the keyboard in its entirety.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Jacob Richardson Earl
Member since: 01/14/2020
966 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
Embry-Riddle Aeronautical University, Team S16-G3, Branham Spring 2020
Member of Embry-Riddle Aeronautical University, Team S16-G3, Branham Spring 2020
ERAU-BRANHAM-S20S16G3
3 Members
6 Guides authored
