Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Touchpad
  • 3 steps

Flags

0

  • BackHP Pavilion x360 14m-cd0003dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For further information to determine if the Touchpad needs to be replaced, please refer to this troubleshooting guide.

What you need

Step 1

              Battery
  • Turn off the computer.
  • Disconnect the power cord and any external devices connected to the computer.
  • Make sure the device is completely turned off or else you may risk injury through electric shock.

Turn off the computer.

Disconnect the power cord and any external devices connected to the computer.

Make sure the device is completely turned off or else you may risk injury through electric shock.

1024

Step 2

  • Flip the device so that the back plate of the laptop is up.
  • Use a Phillips #0 screwdriver to remove the four 6 mm Phillips screws from the bottom cover.
  • You might have to use a spudger to remove any rubber bezels that cover the screws.
  • Pry off the back cover with the spudger tool.

Flip the device so that the back plate of the laptop is up.

Use a Phillips #0 screwdriver to remove the four 6 mm Phillips screws from the bottom cover.

You might have to use a spudger to remove any rubber bezels that cover the screws.

Pry off the back cover with the spudger tool.

Step 3

  • Remove the six 5 mm battery screws, and the battery can then be taken out.

Remove the six 5 mm battery screws, and the battery can then be taken out.

Step 4

              Touchpad
  • Lift the black tab on the ZIF connector, and gently pull the track pad ribbon cable free.

Lift the black tab on the ZIF connector, and gently pull the track pad ribbon cable free.

Step 5

  • Use a Phillips Head Screwdriver to remove the bottom 3 screws (5 mm).
  • Remove the metal plate that secures the touch pad.

Use a Phillips Head Screwdriver to remove the bottom 3 screws (5 mm).

Remove the metal plate that secures the touch pad.

Step 6

  • Use a Phillips Head Screwdriver to unscrew top 3 screws (5 mm).
  • Remove touch pad.

Use a Phillips Head Screwdriver to unscrew top 3 screws (5 mm).

Remove touch pad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Elijah Jope

Member since: 03/22/2022

373 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 7-4, Sinclaire Spring 2022                        

                                                  Member of UMass Dartmouth, Team 7-4, Sinclaire Spring 2022 



                    UMASSD-SINCLAIRE-S22S7G4                     


                                            6 Members                     


                                            6 Guides authored