Hp Pavilion X360 14M Ba011Dx Ram Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          10 - 15 minutes            

Sections

3

• Battery
• 5 steps
• Motherboard
• 3 steps
• RAM
• 1 step

Flags

0

• BackHP Pavilion x360 14m-ba011dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the top left and right rubber pads closest to the hinge of screen using a plastic spudger to expose the screws underneath.
• Remove the following 6 screws from the bottom of the device using a Phillips #00 Screwdriver:​
• Two 7.5 mm screws.
• Three 5 mm screws.
• One 6.5 mm screw.

Remove the top left and right rubber pads closest to the hinge of screen using a plastic spudger to expose the screws underneath.

Remove the following 6 screws from the bottom of the device using a Phillips #00 Screwdriver:​

Two 7.5 mm screws.

Three 5 mm screws.

One 6.5 mm screw.

1024

Step 2

• Push into the two screw holes that were under the rubber pads with the screwdriver to pop the keyboard out just a little.
• Do this with the screen open so that you do not damage the screen.
• Do not remove keyboard all the way.

Push into the two screw holes that were under the rubber pads with the screwdriver to pop the keyboard out just a little.

Do this with the screen open so that you do not damage the screen.

Do not remove keyboard all the way.

Step 3

• Separate the keyboard from the rest of the device using a metal or plastic spudger around the edges.
• Pull up gently just until you can see the cables attaching the keyboard to the motherboard.
• Flip the small white flaps holding the cables to the motherboard open to unplug the cords.

Separate the keyboard from the rest of the device using a metal or plastic spudger around the edges.

Pull up gently just until you can see the cables attaching the keyboard to the motherboard.

Flip the small white flaps holding the cables to the motherboard open to unplug the cords.

Step 4

• Remove the purple cable attaching the battery to the motherboard by flipping the black flap and pulling the cable out.
• Remove seven 4 mm Philips screws using a Phillips #00 Screwdriver.

Remove the purple cable attaching the battery to the motherboard by flipping the black flap and pulling the cable out.

Remove seven 4 mm Philips screws using a Phillips #00 Screwdriver.

Step 5

• Remove the battery by gently pushing battery up, then pulling.

Remove the battery by gently pushing battery up, then pulling.

Step 6

              Motherboard               

• Unclip the 5 cables connecting the motherboard to the computer.

Unclip the 5 cables connecting the motherboard to the computer.

Step 7

• Remove ten 4 mm Phillips screws using a Phillips #00 Screwdriver.

Remove ten 4 mm Phillips screws using a Phillips #00 Screwdriver.

Step 8

• Gently remove the motherboard.

Gently remove the motherboard.

Step 9

              RAM               

• Flip the motherboard upside down and remove the silver box covering the RAM sticks.
• Using your fingers or a pair of tweezers, pull the edges of the card to the side and lift the RAM out of the motherboard.

Flip the motherboard upside down and remove the silver box covering the RAM sticks.

Using your fingers or a pair of tweezers, pull the edges of the card to the side and lift the RAM out of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Katie Pruis                     

Member since: 01/16/2020

778 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S7-G5, Rauch Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S7-G5, Rauch Spring 2020 



                    ERAU-RAUCH-S20S7G5                     


                                            3 Members                     


                                            5 Guides authored