Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • HP Pavilion x360 11-p110nr Battery Removal
  • 3 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

  • BackHP Pavilion x360 11-p110nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              HP Pavilion x360 11-p110nr Battery Removal
  • Unplug the power cord from the power outlet and disconnect the charger.
  • Flip over the laptop.
  • Unscrew the back cover using the Phillips 0 screwdriver.
  • Deattach the cover carefully and do not remove the cover completely as there is a safety plastic that needs to be removed first.
  • Pull the blue safety plastic in an orthogonal motion from where it is inserted.

Unplug the power cord from the power outlet and disconnect the charger.

Flip over the laptop.

Unscrew the back cover using the Phillips 0 screwdriver.

Deattach the cover carefully and do not remove the cover completely as there is a safety plastic that needs to be removed first.

Pull the blue safety plastic in an orthogonal motion from where it is inserted.

1024

Step 2

  • After removing the back, the battery should be the largest black object towards the bottom right of the laptop. It is both the square block and the large rectangular. They look like separate things, but they are both the battery. (see picture 1)
  • Unscrew all the screws attaching the battery to the basis of the computer.
  • There should be five 1 mm Phillips #0 screws in total: two on the top, one on the bottom, one on the right side, and one on the left side. (see picture 1 and 2)

After removing the back, the battery should be the largest black object towards the bottom right of the laptop. It is both the square block and the large rectangular. They look like separate things, but they are both the battery. (see picture 1)

Unscrew all the screws attaching the battery to the basis of the computer.

There should be five 1 mm Phillips #0 screws in total: two on the top, one on the bottom, one on the right side, and one on the left side. (see picture 1 and 2)

Step 3

  • Disconnect the three chips attached to the battery. The chips have a head that can be disconnected by pulling away from the slot. (see picture 3)
  • If they seem hard to pull, try to wiggle them loose to make it easier to pull.
  • Pull out the battery after everything is disconnected.

Disconnect the three chips attached to the battery. The chips have a head that can be disconnected by pulling away from the slot. (see picture 3)

If they seem hard to pull, try to wiggle them loose to make it easier to pull.

Pull out the battery after everything is disconnected.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    AljeannaJohnson

Member since: 09/20/2017

202 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of North Texas, Team S7-G1, Thomas Fall 2017                        

                                                  Member of University of North Texas, Team S7-G1, Thomas Fall 2017 



                    UNT-THOMAS-F17S7G1                     


                                            4 Members                     


                                            4 Guides authored