Difficulty

Easy

Steps

8

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 5 steps
  • Speaker
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackHP Pavilion x2 10-n113dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Before starting, please turn off your laptop.
  • Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

Before starting, please turn off your laptop.

Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

1024

Step 2

  • Gently lift and remove the display panel from the assembly.
  • Remove the translucent yellow tape that covers the battery connector on the mainboard.
  • The tape will be in the way for a future step.

Gently lift and remove the display panel from the assembly.

Remove the translucent yellow tape that covers the battery connector on the mainboard.

The tape will be in the way for a future step.

Step 3

  • Flip up the small white colored locking flap using the tip of a spudger or your fingernail. Then the ribbon cable can be removed easily without much effort.
  • Carefully disconnect the white ribbon cable from the mainboard.

Flip up the small white colored locking flap using the tip of a spudger or your fingernail. Then the ribbon cable can be removed easily without much effort.

Carefully disconnect the white ribbon cable from the mainboard.

Step 4

  • Carefully disconnect the battery cable from its connector on the mainboard.

Carefully disconnect the battery cable from its connector on the mainboard.

Step 5

  • Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.
  • 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.
  • Remove the battery from the device.

Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.

3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.

Remove the battery from the device.

Step 6

              Speaker
  • To unscrew the first speaker, use the Phillips #0 screwdriver to unscrew the 2 screws- head 3.99mm, length 3.32 mm.

To unscrew the first speaker, use the Phillips #0 screwdriver to unscrew the 2 screws- head 3.99mm, length 3.32 mm.

Step 7

  • For the second speaker, repeat the previous step by unscrewing the two screws.

For the second speaker, repeat the previous step by unscrewing the two screws.

Step 8

  • Gently remove the 1st and 2nd speaker from the assembly.

Gently remove the 1st and 2nd speaker from the assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    David Zambrano

Member since: 09/28/2017

797 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       USF Tampa, Team S13-G4, Boczar Fall 2017                        

                                                  Member of USF Tampa, Team S13-G4, Boczar Fall 2017 



                    USFT-BOCZAR-F17S13G4                     


                                            4 Members                     


                                            5 Guides authored