Difficulty

Moderate

Steps

8

Time Required

                          15 minutes            

Sections

1

  • RAM
  • 8 steps

Flags

0

  • BackHP Pavilion Wave 600-a014

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RAM               
  • Disconnect PC from power source and any other devices.

Disconnect PC from power source and any other devices.

1024

Step 2

  • Turn over computer and remove the rubber feet.
  • Remove the three 8mm Philips screws with a Philips #0 screwdriver.
  • Use a pry tool and lift up on the lid.

Turn over computer and remove the rubber feet.

Remove the three 8mm Philips screws with a Philips #0 screwdriver.

Use a pry tool and lift up on the lid.

Step 3

  • Remove the two cables connecting the motherboard to the front I/O panel.

Remove the two cables connecting the motherboard to the front I/O panel.

Step 4

  • From the back I/O panel, pry open the cloth covering.

From the back I/O panel, pry open the cloth covering.

Step 5

  • Remove the 2 black philips screws on the outside of the PC, to the left of the fan.
  • There is one on the top and one on the bottom.

Remove the 2 black philips screws on the outside of the PC, to the left of the fan.

There is one on the top and one on the bottom.

Step 6

  • Put your thumb on the penny-sized hole, and slide the panel upwards.
  • Remove the panel to reveal the stock blue RAM.

Put your thumb on the penny-sized hole, and slide the panel upwards.

Remove the panel to reveal the stock blue RAM.

Step 7

  • Push both of the white tabs away from the RAM stick to free the RAM.

Push both of the white tabs away from the RAM stick to free the RAM.

Step 8

  • You can now easily pull the RAM out of the socket, and replace up to two new ones!

You can now easily pull the RAM out of the socket, and replace up to two new ones!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Arthur Knatt                     

Member since: 09/27/2017

149 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       Cal Poly, Team S8-G4, Banghart Fall 2017                        

                                                  Member of Cal Poly, Team S8-G4, Banghart Fall 2017 



                    CPSU-BANGHART-F17S8G4                     


                                            4 Members                     


                                            5 Guides authored                     

Albert Garcia - Jan 9, 2020

Reply