Difficulty

Moderate

Steps

13

Time Required

Suggest a time??

Sections

3

  • Hard Drive
  • 8 steps
  • Microphone
  • 3 steps
  • Speaker
  • 2 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackHP Pavilion Wave 600-a010

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Hard Drive
  • Remove the three rubber footings by prying from the bottom cover using the plastic opening tool.

Remove the three rubber footings by prying from the bottom cover using the plastic opening tool.

1024

Step 2

  • Remove the three 24 mm screws from the bottom cover using a Phillips #2 screwdriver.

Remove the three 24 mm screws from the bottom cover using a Phillips #2 screwdriver.

Step 3

  • Remove the bottom cover by lifting it up from chassis.

Remove the bottom cover by lifting it up from chassis.

Step 4

  • Remove the three wires connecting the outer cover and front I/O port to the internal components (front usb and auxiliary assembly).

Remove the three wires connecting the outer cover and front I/O port to the internal components (front usb and auxiliary assembly).

Step 5

  • Remove the outer cover by gently pulling apart and pulling away from the chassis.

Remove the outer cover by gently pulling apart and pulling away from the chassis.

Step 6

  • Remove rear I/O bezel using plastic opening tool to pry apart the four clips holding the I/O bezel to the chassis.

Remove rear I/O bezel using plastic opening tool to pry apart the four clips holding the I/O bezel to the chassis.

Step 7

  • Remove all other remaining cables from unit using the plastic opening tool to carefully pry apart the connections.

Remove all other remaining cables from unit using the plastic opening tool to carefully pry apart the connections.

Step 8

  • Remove the HDD by first using the Phillips #2 screwdriver to remove the four 23 mm screws holding together the assembly and then pulling the HDD out of the chassis.

Remove the HDD by first using the Phillips #2 screwdriver to remove the four 23 mm screws holding together the assembly and then pulling the HDD out of the chassis.

Step 9

              Microphone
  • Remove the three 24 mm screws that connect the top cover to the chasis inside the HDD compartment using theTorx #15 screwdriver (an extension and torque lever might be useful).

Remove the three 24 mm screws that connect the top cover to the chasis inside the HDD compartment using theTorx #15 screwdriver (an extension and torque lever might be useful).

Step 10

  • Disconnect the microphone computer chip from the internal components by first peeling away the black adhesive holding the wires to the chassis and gently pulling the chip and wires from its connection.

Disconnect the microphone computer chip from the internal components by first peeling away the black adhesive holding the wires to the chassis and gently pulling the chip and wires from its connection.

Step 11

  • Remove the top bezel from the unit using a Torx Head #15 screwdriver to remove three 24 mm screws and a Phillips Head #00 screwdriver to remove the single 24 mm screw around the outside edge of the chassis.

Remove the top bezel from the unit using a Torx Head #15 screwdriver to remove three 24 mm screws and a Phillips Head #00 screwdriver to remove the single 24 mm screw around the outside edge of the chassis.

Step 12

              Speaker
  • Remove the top chassis cover from the main chassis using the Torx Head #15 screwdriver to remove the nine 24 mm screws and then use the metal prying tool to pry the top chassis cover from the clips holding it to the main chassis and lift carefully away from internal components.

Remove the top chassis cover from the main chassis using the Torx Head #15 screwdriver to remove the nine 24 mm screws and then use the metal prying tool to pry the top chassis cover from the clips holding it to the main chassis and lift carefully away from internal components.

Step 13

  • Remove the speaker by removing three 24 mm screws using the Torx Head #15 screwdriver and carefully lifting up and out from internal components.

Remove the speaker by removing three 24 mm screws using the Torx Head #15 screwdriver and carefully lifting up and out from internal components.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    clayton stokes

Member since: 09/20/2017

652 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Idaho State University, Team S4-G3, Watkins Fall 2017                        

                                                  Member of Idaho State University, Team S4-G3, Watkins Fall 2017 



                    ISU-WATKINS-F17S4G3                     


                                            4 Members                     


                                            5 Guides authored