Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Keyboard
- 4 steps
Flags
0
BackHP Pavilion TouchSmart 14z-n100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Keyboard
- Remove these two, 4 mm long number 1 Phillips screws from the device.
Remove these two, 4 mm long number 1 Phillips screws from the device.
1024
Step 2
- Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.
Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.
Step 3
- Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.
Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.
Step 4
- Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.
Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Antonio DiMattia
Member since: 08/28/2018
133 Reputation
1 Guide authored
Badges:
3
Team
IUPUI, Team S1-G4, Arle Fall 2018
Member of IUPUI, Team S1-G4, Arle Fall 2018
IUPUI-ARLE-F18S1G4
3 Members
3 Guides authored