Difficulty
Moderate
Steps
5
Time Required
15 - 30 minutes
Sections
2
- Battery
- 1 step
- WLAN card
- 4 steps
Flags
0
BackHP Pavilion TouchSmart 11z-e000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove battery by pushing the two tabs and pulling the battery outwards slowly but firmly.
Remove battery by pushing the two tabs and pulling the battery outwards slowly but firmly.
1024
Step 2
Remove back plate
- Using a spudger, pry the plastic plate off of the base of the computer.
Using a spudger, pry the plastic plate off of the base of the computer.
Step 3
Remove screws
- Remove the screws from the WLAN card
Remove the screws from the WLAN card
Step 4
Remove WLAN card
- Remove the card by sliding out of the slot.
Remove the card by sliding out of the slot.
Step 5
Disconnect the cables
- Remove the cables from their connections by pulling them off. They should snap on and off.
Remove the cables from their connections by pulling them off. They should snap on and off.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 6 other contributors
Nguyen
Member since: 01/22/2015
295 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 21-22, Maness Winter 2015
Member of Cal Poly, Team 21-22, Maness Winter 2015
CPSU-MANESS-W15S21G22
4 Members
6 Guides authored
