Difficulty

Moderate

Steps

5

Time Required

                          10 - 15 minutes

Sections

1

  • Screen
  • 5 steps

Flags

0

  • BackHP Pavilion Sleekbook 15-b142dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen.
  • Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.

Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen.

Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.

1024

Step 2

              Screws
  • Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.

Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.

Step 3

  • Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.

Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.

Step 4

  • Remove the four 5.7 mm (bigger) screws located towards the corners of the device.

Remove the four 5.7 mm (bigger) screws located towards the corners of the device.

Step 5

  • The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord. After the plastic is removed, unplug the cord connected to the screen.

The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord. After the plastic is removed, unplug the cord connected to the screen.

To reassemble the device, follow the instructions in the reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 8 other contributors 


                    Jonathan

Member since: 01/13/2015

755 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       USF Tampa, Team 3-3, Hickman Winter 2015                        

                                                  Member of USF Tampa, Team 3-3, Hickman Winter 2015 



                    USFT-HICKMAN-W15S3G3                     


                                            4 Members                     


                                            5 Guides authored