Hp Pavilion Sleekbook 14 B013Cl Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
3 steps
Screen
4 steps

Flags

BackHP Pavilion Sleekbook 14-b013cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the computer over and move the battery lock switch to the “unlocked” position (marked by an orange lock icon).

Flip the computer over and move the battery lock switch to the “unlocked” position (marked by an orange lock icon).

1024

Step 2

Press the switch on the right-hand side of the back of the device towards the center until the gray battery icon is no longer visible. This will eject the battery.

Press the switch on the right-hand side of the back of the device towards the center until the gray battery icon is no longer visible. This will eject the battery.

Step 3

Carefully pull the battery away from the device.

Carefully pull the battery away from the device.

Step 4

              Screen

Using a 1.0 Flathead screwdriver, remove the two stickers covering the screws that hold the screen in place.
Use a Phillips #1 screwdriver to remove the two 3.2mm screws that are now visible.

Using a 1.0 Flathead screwdriver, remove the two stickers covering the screws that hold the screen in place.

Use a Phillips #1 screwdriver to remove the two 3.2mm screws that are now visible.

Step 5

Using a plastic opening tool, pry the plastic screen protector off, sliding the tool along the seam. Press the tool in until you hear the plastic tabs clicking as they come undone.
Separate the plastic that makes up the hinges for the screen, as they are part of the same screen protector.
Use your hands or plastic tool to peel the screen protector away from the adhesive holding it in place.

Using a plastic opening tool, pry the plastic screen protector off, sliding the tool along the seam. Press the tool in until you hear the plastic tabs clicking as they come undone.

Separate the plastic that makes up the hinges for the screen, as they are part of the same screen protector.

Use your hands or plastic tool to peel the screen protector away from the adhesive holding it in place.

Step 6

Using a Phillips #1 screwdriver, remove the six 2.8mm screws holding the screen in place.
Lift the screen away from the cover until you have access to the connector cable near the bottom of the screen.

Using a Phillips #1 screwdriver, remove the six 2.8mm screws holding the screen in place.

Lift the screen away from the cover until you have access to the connector cable near the bottom of the screen.

Step 7

Peel away any sticker holding the connector in place and simply pull the tab out of the connector parallel with the screen.
Remove the screen from the device.

Peel away any sticker holding the connector in place and simply pull the tab out of the connector parallel with the screen.

Remove the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors

                    Duncan Steele

Member since: 04/10/2018

308 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Eastern Washington University, Team S2-G3, Ramos Spring 2018                        

                                                  Member of Eastern Washington University, Team S2-G3, Ramos Spring 2018 



                    EWU-RAMOS-S18S2G3                     


                                            5 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team