Hp Pavilion Sleekbook 14 B013Cl Cooling Fan Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Battery
3 steps
Cooling Fan
8 steps

Flags

BackHP Pavilion Sleekbook 14-b013cl
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Flip the computer over and move the battery lock switch to the “unlocked” position (marked by an orange lock icon).

Flip the computer over and move the battery lock switch to the “unlocked” position (marked by an orange lock icon).

1024

Step 2

Press the switch on the right-hand side of the back of the device towards the center until the gray battery icon is no longer visible. This will eject the battery.

Press the switch on the right-hand side of the back of the device towards the center until the gray battery icon is no longer visible. This will eject the battery.

Step 3

Carefully pull the battery away from the device.

Carefully pull the battery away from the device.

Step 4

              Cooling Fan

Using a Phillips #0 screwdriver, unscrew all nine of the screws from the bottom of the computer.
There is a wire connecting the keyboard to the motherboard. Do not pull the keyboard away until you have disconnected the wire.

Using a Phillips #0 screwdriver, unscrew all nine of the screws from the bottom of the computer.

There is a wire connecting the keyboard to the motherboard. Do not pull the keyboard away until you have disconnected the wire.

Step 5

Using a plastic opening tool, pry up along the edge of the keyboard.
There is a wire connecting the keyboard to the motherboard. Do not completely pull the keyboard off until the wire is disconnected.

Using a plastic opening tool, pry up along the edge of the keyboard.

There is a wire connecting the keyboard to the motherboard. Do not completely pull the keyboard off until the wire is disconnected.

Step 6

To disconnect the wire, pry up on the latch connecting it to the motherboard.

To disconnect the wire, pry up on the latch connecting it to the motherboard.

Step 7

Using a plastic or metal spudger, carefully pry apart the palm rest from the rest of the laptop.
Be careful when using the metal spudger, as you could damage the internal components if the spudger is inserted too far.
Do not completely pull the halves apart yet because there are still wires holding them together.

Using a plastic or metal spudger, carefully pry apart the palm rest from the rest of the laptop.

Be careful when using the metal spudger, as you could damage the internal components if the spudger is inserted too far.

Do not completely pull the halves apart yet because there are still wires holding them together.

Step 8

Disconnect the touch pad wire by flipping the black lever with a plastic spudger.

Disconnect the touch pad wire by flipping the black lever with a plastic spudger.

Step 9

Unscrew the circuit board underneath the power button.
Remove this circuit board by pulling up and away on the plastic tab.

Unscrew the circuit board underneath the power button.

Remove this circuit board by pulling up and away on the plastic tab.

Step 10

Using a Phillips #0 screwdriver, remove all the screws and take the metal plate off the mother board.
Double sided tape holds the plate down as well as the screws. You will need to apply force to remove the plate.

Using a Phillips #0 screwdriver, remove all the screws and take the metal plate off the mother board.

Double sided tape holds the plate down as well as the screws. You will need to apply force to remove the plate.

Step 11

Remove the three screws holding the cooling fan in place using a Phillips #0 screwdriver.
Using a plastic opening tool, remove the power cable for the fan.
Remove the fan from the device.

Remove the three screws holding the cooling fan in place using a Phillips #0 screwdriver.

Using a plastic opening tool, remove the power cable for the fan.

Remove the fan from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    Josh Svik

Member since: 04/10/2018

281 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Eastern Washington University, Team S2-G3, Ramos Spring 2018                        

                                                  Member of Eastern Washington University, Team S2-G3, Ramos Spring 2018 



                    EWU-RAMOS-S18S2G3                     


                                            5 Members                     


                                            5 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team