Hp Pavilion Notebook 15 Ab293Cl Cpu Fan Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 - 25 seconds            

Sections

1

• CPU Fan
• 7 steps

Flags

0

• BackHP Pavilion 15-ab293cl

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              CPU Fan               

• Start by flipping the laptop, revealing its back.

Start by flipping the laptop, revealing its back.

1024

Step 2

• Slide the tab marked with a lock/unlock symbol. The slide the other tab in order to release the battery.

Slide the tab marked with a lock/unlock symbol. The slide the other tab in order to release the battery.

Step 3

• Once the battery is removed, unscrew and remove the both of the 7.5 mm screws off the black tabs using a PH1 screw driver. Then pry off the covers using the plastic opening tools.

Once the battery is removed, unscrew and remove the both of the 7.5 mm screws off the black tabs using a PH1 screw driver. Then pry off the covers using the plastic opening tools.

Step 4

• Remove all 16 size 3.5 mm screws with a PH1 screwdriver and pry the CD drive in order reveal one last screw that must be removed.

Remove all 16 size 3.5 mm screws with a PH1 screwdriver and pry the CD drive in order reveal one last screw that must be removed.

Step 5

• Utilizing either a plastic or metal opening tool, begin prying the case from the laptop. Lastly, remove the remaining clips located on the back of the laptop.

Utilizing either a plastic or metal opening tool, begin prying the case from the laptop. Lastly, remove the remaining clips located on the back of the laptop.

Step 6

• Once the laptop is fully open locate the cooling fan.

Once the laptop is fully open locate the cooling fan.

Step 7

• Utilizing a PH00 Screwdriver remove the two 3.5 mm screws detaining the cooling fan. Then use tweezers to remove the plug connecting the cooling fan to the mother board. Lastly remove the cooling fan.

Utilizing a PH00 Screwdriver remove the two 3.5 mm screws detaining the cooling fan. Then use tweezers to remove the plug connecting the cooling fan to the mother board. Lastly remove the cooling fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    John Carlo Barajas                     

Member since: 09/10/2018

187 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Gateway, Team S1-G2, Luster Fall 2018                        

                                                  Member of Gateway, Team S1-G2, Luster Fall 2018 



                    GCC-LUSTER-F18S1G2                     


                                            4 Members                     


                                            4 Guides authored                     

mrobinson29 - Oct 9, 2021

Reply

very detailed. Thanks!