Hp Pavilion G7 2235Dx Screen Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 minutes            

Sections

2

• Fan
• 5 steps
• Screen
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Pavilion G7-2235DX

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Fan               

• Flip the laptop over and remove six 7.25mm screws.

Flip the laptop over and remove six 7.25mm screws.

1024

Step 2

• Using the plastic opening tool or spudger, separate the keyboard from the frame of the laptop.
• Gently pull the keyboard away from the laptop, toward you, until it is completely separated from the laptop.

Using the plastic opening tool or spudger, separate the keyboard from the frame of the laptop.

Gently pull the keyboard away from the laptop, toward you, until it is completely separated from the laptop.

Step 3

• Remove the four 7.25mm screws located by the red markers.

Remove the four 7.25mm screws located by the red markers.

Step 4

• Gently lift the panel up, exposing the inside of the laptop.

Gently lift the panel up, exposing the inside of the laptop.

Step 5

• The fan is located in the top, left hand corner. Now, it can be gently lifted out using your hands.

The fan is located in the top, left hand corner. Now, it can be gently lifted out using your hands.

Step 6

              Screen               

• To remove the laptop’s screen, you will have to remove a total of four 7.25mm screws.
• First, remove the two 7.25mm screws found in the upper right corner as shown.

To remove the laptop’s screen, you will have to remove a total of four 7.25mm screws.

First, remove the two 7.25mm screws found in the upper right corner as shown.

Step 7

• Next, unscrew the two 7.25mm screws in the upper left corner of the laptop as shown.

Next, unscrew the two 7.25mm screws in the upper left corner of the laptop as shown.

Step 8

• Once all of the screws have been removed, gently lift the laptop’s screen from the base of the computer.

Once all of the screws have been removed, gently lift the laptop’s screen from the base of the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Bre'Anna Sanders                     

Member since: 10/11/2016

68 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 1-7, Leahy Fall 2016                        

                                                  Member of USF Tampa, Team 1-7, Leahy Fall 2016 



                    USFT-LEAHY-F16S1G7                     


                                            3 Members                     


                                            5 Guides authored