Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Service Door
  • 1 step
  • Keyboard
  • 4 steps

Flags

0

  • BackHP Pavilion g7-1365dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • To prevent injury, make sure the laptop is powered off before removing the battery.
  • Flip the laptop so that it is upside down and opens away from you. This exposes the battery, it will be centered at the bottom of the laptop .
  • Push the switch above the battery towards the center of the laptop .

To prevent injury, make sure the laptop is powered off before removing the battery.

Flip the laptop so that it is upside down and opens away from you. This exposes the battery, it will be centered at the bottom of the laptop .

Push the switch above the battery towards the center of the laptop .

1024

Step 2

  • While pushing the switch, lift the battery by the side closest to the switch up and away from the laptop.

While pushing the switch, lift the battery by the side closest to the switch up and away from the laptop.

Step 3

              Service Door
  • Using a Phillips size 0 screwdriver, unscrew the 2 Phillips screws.
  • Use the opening tool around the edges of the service door to loosen it and remove it.

Using a Phillips size 0 screwdriver, unscrew the 2 Phillips screws.

Use the opening tool around the edges of the service door to loosen it and remove it.

Step 4

              Keyboard
  • Remove the 4.7 mm screw that secures the keyboard to the computer using the Philips 00 screwdriver.

Remove the 4.7 mm screw that secures the keyboard to the computer using the Philips 00 screwdriver.

Step 5

  • Rest the laptop on its side so the optical drive is pointing up.
  • Insert the hex 2.0 screwdriver into the screw hole that had the 4.7 mm screw, press till the keyboard pops out.

Rest the laptop on its side so the optical drive is pointing up.

Insert the hex 2.0 screwdriver into the screw hole that had the 4.7 mm screw, press till the keyboard pops out.

Step 6

  • Turn the laptop right side up, facing you. Use the opening tool to help pull the keyboard towards you.

Turn the laptop right side up, facing you. Use the opening tool to help pull the keyboard towards you.

Step 7

  • Unplug the keyboard ribbon cable and remove the keyboard.

Unplug the keyboard ribbon cable and remove the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    jonathan Rodriguez

Member since: 03/26/2019

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S1-G1, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G1, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S1G1                     


                                            4 Members                     


                                            8 Guides authored