Difficulty

Easy

Steps

4

Time Required

                          4 minutes

Sections

3

  • Battery
  • 2 steps
  • Service Door
  • 1 step
  • Hard Drive
  • 1 step

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackHP Pavilion g7-1365dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • To prevent injury, make sure the laptop is powered off before removing the battery.
  • Flip the laptop so that it is upside down and opens away from you. This exposes the battery, it will be centered at the bottom of the laptop .
  • Push the switch above the battery towards the center of the laptop .

To prevent injury, make sure the laptop is powered off before removing the battery.

Flip the laptop so that it is upside down and opens away from you. This exposes the battery, it will be centered at the bottom of the laptop .

Push the switch above the battery towards the center of the laptop .

1024

Step 2

  • While pushing the switch, lift the battery by the side closest to the switch up and away from the laptop.

While pushing the switch, lift the battery by the side closest to the switch up and away from the laptop.

Step 3

              Service Door
  • Using a Phillips size 0 screwdriver, unscrew the 2 Phillips screws.
  • Use the opening tool around the edges of the service door to loosen it and remove it.

Using a Phillips size 0 screwdriver, unscrew the 2 Phillips screws.

Use the opening tool around the edges of the service door to loosen it and remove it.

Step 4

              Hard Drive
  • Disconnect the drive connector cable from the system board by pulling the plastic tab on top of the connector.
  • Use the opening tool to lift the hard drive out.
  • Remove the hard drive.

Disconnect the drive connector cable from the system board by pulling the plastic tab on top of the connector.

Use the opening tool to lift the hard drive out.

Remove the hard drive.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Derrick Manu

Member since: 03/18/2019

245 Reputation

                                      2 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S1-G1, Simcock Spring 2019                        

                                                  Member of UMass Dartmouth, Team S1-G1, Simcock Spring 2019 



                    UMASSD-SIMCOCK-S19S1G1                     


                                            4 Members                     


                                            8 Guides authored