Difficulty
Easy
Steps
5
Time Required
3 minutes
Sections
2
- Battery
- 2 steps
- Surface Panel
- 3 steps
Flags
0
BackHP Pavilion g7-1150us
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide the battery removal switch towards the center of the laptop until the battery pops out.
Slide the battery removal switch towards the center of the laptop until the battery pops out.
1024
Step 2
- Remove the battery from the computer.
Remove the battery from the computer.
Step 3
Surface Panel
- Unscrew the two 4mm Phillips #0 screws found in the surface panel.
Unscrew the two 4mm Phillips #0 screws found in the surface panel.
Step 4
- Using the spudger, pry the surface panel off starting from the side where the battery was located.
- Pry the remainder of the panel off by sliding the spudger underneath the panel and gently lifting.
- Aim for the corners of the panel while using the spudger to methodically remove it without damaging it.
Using the spudger, pry the surface panel off starting from the side where the battery was located.
Pry the remainder of the panel off by sliding the spudger underneath the panel and gently lifting.
Aim for the corners of the panel while using the spudger to methodically remove it without damaging it.
Step 5
- Lift the pried surface panel off of the computer.
Lift the pried surface panel off of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Kyle Dinunno
Member since: 03/20/2019
377 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S6-G3, Peak Spring 2019
Member of UMass Dartmouth, Team S6-G3, Peak Spring 2019
UMASSD-PEAK-S19S6G3
3 Members
5 Guides authored
