Difficulty

Easy

Steps

7

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • Surface Panel
  • 3 steps
  • RAM
  • 2 steps

Flags

0

  • BackHP Pavilion g7-1150us

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Slide the battery removal switch towards the center of the laptop until the battery pops out.

Slide the battery removal switch towards the center of the laptop until the battery pops out.

1024

Step 2

  • Remove the battery from the computer.

Remove the battery from the computer.

Step 3

              Surface Panel
  • Unscrew the two 4mm Phillips #0 screws found in the surface panel.

Unscrew the two 4mm Phillips #0 screws found in the surface panel.

Step 4

  • Using the spudger, pry the surface panel off starting from the side where the battery was located.
  • Pry the remainder of the panel off by sliding the spudger underneath the panel and gently lifting.
  • Aim for the corners of the panel while using the spudger to methodically remove it without damaging it.

Using the spudger, pry the surface panel off starting from the side where the battery was located.

Pry the remainder of the panel off by sliding the spudger underneath the panel and gently lifting.

Aim for the corners of the panel while using the spudger to methodically remove it without damaging it.

Step 5

  • Lift the pried surface panel off of the computer.

Lift the pried surface panel off of the computer.

Step 6

              RAM
  • Push outwards on the two clips holding the RAM in place.

Push outwards on the two clips holding the RAM in place.

Step 7

  • Slide the RAM out of its position in the opposite direction of the battery removal switch.

Slide the RAM out of its position in the opposite direction of the battery removal switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kyle Dinunno

Member since: 03/20/2019

377 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S6-G3, Peak Spring 2019                        

                                                  Member of UMass Dartmouth, Team S6-G3, Peak Spring 2019 



                    UMASSD-PEAK-S19S6G3                     


                                            3 Members                     


                                            5 Guides authored