Difficulty
Easy
Steps
6
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- Power Button
- 4 steps
Flags
0
BackHP Pavilion G60-630US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure the laptop is powered off and unplugged first.
- Turn your laptop over so the bottom is facing up.
- Locate the battery latch and slide the latch switch all the way to the left.
- The latch will lock and stay in place.
Make sure the laptop is powered off and unplugged first.
Turn your laptop over so the bottom is facing up.
Locate the battery latch and slide the latch switch all the way to the left.
The latch will lock and stay in place.
1024
Step 2
- Carefully lift the battery out and away from the laptop.
Carefully lift the battery out and away from the laptop.
Step 3
Power Button
- Open the laptop normally.
- Using your fingers (or a spudger if needed), loosen the silver cover surrounding the keyboard.
- You will not be able to fully remove the keyboard/silver border all the way until the next step.
Open the laptop normally.
Using your fingers (or a spudger if needed), loosen the silver cover surrounding the keyboard.
You will not be able to fully remove the keyboard/silver border all the way until the next step.
Step 4
- Carefully place your hands underneath the now loosened keyboard and locate the ribbon keeping the keyboard connected to the laptop.
- Locate the tabs keeping the ribbon in place.
- Gently push the tabs inward to release the ribbon and to detach the keyboard.
- Carefully remove the keyboard and place it off to the side.
- The silver border and the power button will still be connected by a different ribbon.
Carefully place your hands underneath the now loosened keyboard and locate the ribbon keeping the keyboard connected to the laptop.
Locate the tabs keeping the ribbon in place.
Gently push the tabs inward to release the ribbon and to detach the keyboard.
Carefully remove the keyboard and place it off to the side.
The silver border and the power button will still be connected by a different ribbon.
Step 5
- Locate the ribbon keeping the power button attached to the laptop.
- Push the tab attaching the ribbon to the laptop to detach the silver border and the power button.
Locate the ribbon keeping the power button attached to the laptop.
Push the tab attaching the ribbon to the laptop to detach the silver border and the power button.
Step 6
- If you are looking at this in the HP Pavilion G60-630US Screen Replacement Guide, ignore this step
- Flip the silver border over to expose the underside of the power bar.
- Unscrew the 4 screws keeping the power bar in place. Place the screws off the the side.
- Carefully remove the power bar.
If you are looking at this in the HP Pavilion G60-630US Screen Replacement Guide, ignore this step
Flip the silver border over to expose the underside of the power bar.
Unscrew the 4 screws keeping the power bar in place. Place the screws off the the side.
Carefully remove the power bar.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
[deleted]
Member since: 10/02/2017
207 Reputation
2 Guides authored
Badges:
5
+2 more badges
Dave - Mar 18, 2018
Reply
You have neglected to speak about removal of 5 screws from the bottom of the laptop! 3 inside the battery compartment and 2 on the corners of the laptop. Removal of these allow removal of the bezel and keyboard. Failure to remove these screws will cause damage to the keyboard and bezel!