Difficulty

Moderate

Steps

19

Time Required

                          25 minutes

Sections

2

  • Battery
  • 1 step
  • Screen
  • 18 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Pavilion G60-247CL

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Press down and to the right on the battery lock slide.
  • Once slid over to the right the battery will pop up and out.

Press down and to the right on the battery lock slide.

Once slid over to the right the battery will pop up and out.

1024

Step 2

              Screen
  • Remove the seven Phillips #1 screws from the back side of the laptop.

Remove the seven Phillips #1 screws from the back side of the laptop.

Step 3

  • Remove the seven Phillips #0 screws from the battery compartment.

Remove the seven Phillips #0 screws from the battery compartment.

Step 4

  • Turn the computer around to the front side.
  • Using an opening tool, prop open the keyboard casing.

Turn the computer around to the front side.

Using an opening tool, prop open the keyboard casing.

Step 5

  • Carefully lift up the keyboard.
  • Gently pull up the connecting wire clip to completely detach the keyboard.

Carefully lift up the keyboard.

Gently pull up the connecting wire clip to completely detach the keyboard.

Step 6

  • At the top right of the laptop there will be another wire clip holding the keyboard casing.
  • Carefully pull out the wire clip to fully detach the covering.

At the top right of the laptop there will be another wire clip holding the keyboard casing.

Carefully pull out the wire clip to fully detach the covering.

Step 7

  • At the top right of the laptop remove the black wire from under the metal tabs using the tweezers.

At the top right of the laptop remove the black wire from under the metal tabs using the tweezers.

Step 8

  • Remove the black wire from the top right corner by gently pulling outward.

Remove the black wire from the top right corner by gently pulling outward.

Step 9

  • At the top left of the computer remove the black clip using the opening tool.
  • Push the opening tool to the right to pop out the clip.

At the top left of the computer remove the black clip using the opening tool.

Push the opening tool to the right to pop out the clip.

Step 10

  • Locate at the bottom left of the computer a white clip.
  • Using an opening tool, prop out the white clip.

Locate at the bottom left of the computer a white clip.

Using an opening tool, prop out the white clip.

Step 11

  • On the left side of the computer locate the black wire with the clear clip.
  • Gently pull the wire to the right to detach it.

On the left side of the computer locate the black wire with the clear clip.

Gently pull the wire to the right to detach it.

Step 12

  • At the top corners of the computer, unscrew the three Phillips #0 screws.
  • Lift up the top half of the computer carefully.

At the top corners of the computer, unscrew the three Phillips #0 screws.

Lift up the top half of the computer carefully.

Step 13

  • Locate the two screws at the bottom corners of the screen.
  • Using the tweezers remove the rubber black covering over the screw.
  • Remove the two Phillips #0 screws.

Locate the two screws at the bottom corners of the screen.

Using the tweezers remove the rubber black covering over the screw.

Remove the two Phillips #0 screws.

Step 14

  • Using the opening tool, prop off the screen covering.
  • Remove the covering to expose the screen completely.

Using the opening tool, prop off the screen covering.

Remove the covering to expose the screen completely.

Step 15

  • Remove the bottom two screen bearings.
  • Using a Phillips 1 screwdriver, remove the two screws on each side.

Remove the bottom two screen bearings.

Using a Phillips 1 screwdriver, remove the two screws on each side.

Step 16

  • Using the tweezers remove the red and white wire from the bottom of the screen.

Using the tweezers remove the red and white wire from the bottom of the screen.

Step 17

  • Prop the screen up slightly .
  • Using the tweezers unclip the white wire.

Prop the screen up slightly .

Using the tweezers unclip the white wire.

Step 18

  • While the screen is still propped open remove the black wire from the bottom middle of the screen by pulling gently.

While the screen is still propped open remove the black wire from the bottom middle of the screen by pulling gently.

Step 19

  • Remove the screen from the outer casing carefully.

Remove the screen from the outer casing carefully.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Haley Matthews

Member since: 03/12/2018

517 Reputation

                                      3 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team S4-G5, Covino Spring 2018                        

                                                  Member of UMass Dartmouth, Team S4-G5, Covino Spring 2018 



                    UMASSD-COVINO-S18S4G5                     


                                            3 Members                     


                                            5 Guides authored