Hp Pavilion G60 235Dx Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          40 minutes - 1 hour

Sections

Keyboard
3 steps
Screen
8 steps

Flags

BackHP Pavilion G60-235DX
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Please turn the power of your device off. If not, it may cause a damage to the computer’s hard drive and the person.
Slide the lock to remove the battery
After removing the battery, you can find 8 screws where battery were placed. Unscrew those 8 screws.

Please turn the power of your device off. If not, it may cause a damage to the computer’s hard drive and the person.

Slide the lock to remove the battery

After removing the battery, you can find 8 screws where battery were placed. Unscrew those 8 screws.

1024

Step 2

Do not force if the frame is not coming out. It may break the clip of the frame.
After the screws from battery house are removed, open the laptop to remove the keyboard frame.
Approach the frame on the side by using the prying tool. Carefully remove the clip. Watch out not to break the clip.
Then use the prying tool to carefully remove the frame from the top. Be careful not to break the clip.
Then, press the button located top of the touch pad to completely remove the frame from the bottom of the frame.

Do not force if the frame is not coming out. It may break the clip of the frame.

After the screws from battery house are removed, open the laptop to remove the keyboard frame.

Approach the frame on the side by using the prying tool. Carefully remove the clip. Watch out not to break the clip.

Then use the prying tool to carefully remove the frame from the top. Be careful not to break the clip.

Then, press the button located top of the touch pad to completely remove the frame from the bottom of the frame.

Step 3

When the frame is removed, keyboard will be free to be removed. There is cable ribbon to be removed. Gently pull out the ribbon from where it is plugged.
The keyboard is now detached from the computer.

When the frame is removed, keyboard will be free to be removed. There is cable ribbon to be removed. Gently pull out the ribbon from where it is plugged.

The keyboard is now detached from the computer.

Step 4

              Screen

Unplug two wires by gently pulling it out.
Then remove two wires from the clip that was holding the wire in place.

Unplug two wires by gently pulling it out.

Then remove two wires from the clip that was holding the wire in place.

Step 5

Remove the covered cable ribbon that is located at the left side of the computer.

Remove the covered cable ribbon that is located at the left side of the computer.

Step 6

Gently pull the smaller wire from its clip. Please do not pull the wire by holding the wire itself. Use the plastic cover to pull.

Gently pull the smaller wire from its clip. Please do not pull the wire by holding the wire itself. Use the plastic cover to pull.

Step 7

There are 3 screws holding the screen from laptop each side. Unscrew every screw for each side.
Then gently pull out the screen from its place. Be sure not to force it out.

There are 3 screws holding the screen from laptop each side. Unscrew every screw for each side.

Then gently pull out the screen from its place. Be sure not to force it out.

Step 8

Use the spudger to remove the rubber sticker located at the bottom of each side of the screen.
Unscrew the the screws from each side.

Use the spudger to remove the rubber sticker located at the bottom of each side of the screen.

Unscrew the the screws from each side.

Step 9

Firmly pry the front screen cover off. Slide the prying tool around the front screen. Please be careful not to destroy the clip. It will destroy the entire screen.

Firmly pry the front screen cover off. Slide the prying tool around the front screen. Please be careful not to destroy the clip. It will destroy the entire screen.

Step 10

Be careful when moving the screen, you may damage the monitor and webcam cable.
Remove the screen from its house.
Gently disconnect the webcam cable from the monitor which locate at the back of the laptop.

Be careful when moving the screen, you may damage the monitor and webcam cable.

Remove the screen from its house.

Gently disconnect the webcam cable from the monitor which locate at the back of the laptop.

Step 11

Remove four screws from the side.

Remove four screws from the side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Gilbert Han

Member since: 01/24/2017

241 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 10-5, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 10-5, Banghart Winter 2017 



                    CPSU-BANGHART-W17S10G5                     


                                            3 Members                     


                                            5 Guides authored

tali9 - May 8, 2022

Thanks helping me me out. left 1 key screw stuck.

Keyboard wudnt come out SUPRISE SUPRISE!. very kind of to help.

Introduction#

What you need#

Team#

Introduction

What you need

Team