Difficulty

Easy

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Battery
  • 3 steps
  • Wireless Card
  • 3 steps

Flags

0

  • BackHP Pavilion g6-1d16dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

1024

Step 2

  • Slide the switch under the battery compartment to release the battery.

Slide the switch under the battery compartment to release the battery.

Step 3

  • Remove the battery.
  • The battery will have popped out of the compartment when it was released.

Remove the battery.

The battery will have popped out of the compartment when it was released.

Step 4

              Wireless Card
  • Unscrew the two captive screws using the Phillips #000 screwdriver.
  • The screws will not come all the way out; stop when you hear them click.
  • Unsnap the protective cover off of the device.
  • Locate the wireless card.

Unscrew the two captive screws using the Phillips #000 screwdriver.

The screws will not come all the way out; stop when you hear them click.

Unsnap the protective cover off of the device.

Locate the wireless card.

Step 5

  • Remove the two screws located on the corners of the wireless card, using the Phillips #000 screwdriver.
  • Slide the Wi-Fi card out of the socket.

Remove the two screws located on the corners of the wireless card, using the Phillips #000 screwdriver.

Slide the Wi-Fi card out of the socket.

Step 6

  • Using your fingers, unsnap the coaxial cable wires from the wireless card.
  • Connect them to the new card based on the attachment points.
  • These points are indicated by numbered tabs. For example, wire #1 connects to #1 on the wireless card.

Using your fingers, unsnap the coaxial cable wires from the wireless card.

Connect them to the new card based on the attachment points.

These points are indicated by numbered tabs. For example, wire #1 connects to #1 on the wireless card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Shyanne Bolton

Member since: 04/05/2018

448 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Linn Benton Community College, Team S2-G6, Johnson Spring 2018                        

                                                  Member of Linn Benton Community College, Team S2-G6, Johnson Spring 2018 



                    LBCC-JOHNSON-S18S2G6                     


                                            4 Members                     


                                            8 Guides authored