Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

2

  • Battery
  • 3 steps
  • RAM
  • 3 steps

Flags

0

  • BackHP Pavilion g6-1d16dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

1024

Step 2

  • Slide the switch under the battery compartment to release the battery.

Slide the switch under the battery compartment to release the battery.

Step 3

  • Remove the battery.
  • The battery will have popped out of the compartment when it was released.

Remove the battery.

The battery will have popped out of the compartment when it was released.

Step 4

              RAM
  • Unscrew the two silver screws holding the protective cover in place until they make a clicking noise.
  • The screws do not remove from the cover.
  • Unsnap the cover by lifting the edge along the battery compartment.

Unscrew the two silver screws holding the protective cover in place until they make a clicking noise.

The screws do not remove from the cover.

Unsnap the cover by lifting the edge along the battery compartment.

Step 5

  • Push the two tabs on the sides of the RAM compartment away from the memory stick.
  • This can be done with your fingers, or any sort of flat edged tool.

Push the two tabs on the sides of the RAM compartment away from the memory stick.

This can be done with your fingers, or any sort of flat edged tool.

Step 6

  • After the tabs are moved, the RAM stick will pop up, and you can pull the card straight out of its slot.
  • Place the stick (new or original) back into the same slot where you pulled the previous stick from, and press straight down on the card until the tabs click into place.

After the tabs are moved, the RAM stick will pop up, and you can pull the card straight out of its slot.

Place the stick (new or original) back into the same slot where you pulled the previous stick from, and press straight down on the card until the tabs click into place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Calvin Kerr

Member since: 04/05/2018

872 Reputation

                                      5 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Linn Benton Community College, Team S2-G6, Johnson Spring 2018                        

                                                  Member of Linn Benton Community College, Team S2-G6, Johnson Spring 2018 



                    LBCC-JOHNSON-S18S2G6                     


                                            4 Members                     


                                            8 Guides authored