Difficulty
Moderate
Steps
9
Time Required
10 minutes
Sections
2
- Battery
- 2 steps
- Screen
- 7 steps
Flags
1
Needs More Images
A few more images would make this guide’s procedures crystal clear.
BackHP Pavilion g4-1117dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Slide pill shaped tab to the other side of the channel.
Slide pill shaped tab to the other side of the channel.
1024
Step 2
- Remove battery while keeping the tab to the side.
Remove battery while keeping the tab to the side.
Step 3
Screen
- Remove two triangular shaped screw covers in the bottom corners of the monitor near the hinges.
- Unscrew the two 4.0 mm JIS #0 screws holding the hinge covers.
Remove two triangular shaped screw covers in the bottom corners of the monitor near the hinges.
Unscrew the two 4.0 mm JIS #0 screws holding the hinge covers.
Step 4
- Pry off the monitor border cover.
Pry off the monitor border cover.
Step 5
- Remove four 4.0mm JIS #0 screws located at each corner of the monitor.
Remove four 4.0mm JIS #0 screws located at each corner of the monitor.
Step 6
- Remove the two silver hinge covers.
Remove the two silver hinge covers.
Step 7
- Unplug at golden connector.
Unplug at golden connector.
Step 8
- Remove four 3.0mm JIS #0 screws, two on each side of the screen.
Remove four 3.0mm JIS #0 screws, two on each side of the screen.
Step 9
- Carefully remove the screen.
Carefully remove the screen.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Robert Hamilton
Member since: 03/01/2018
1,072 Reputation
10 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S2-G7, Simcock Spring 2018
Member of UMass Dartmouth, Team S2-G7, Simcock Spring 2018
UMASSD-SIMCOCK-S18S2G7
4 Members
10 Guides authored
S i n o for pc - May 7, 2022
Reply
nice very informative