Difficulty

Easy

Steps

4

Time Required

                          2 minutes            

Sections

1

  • RAM
  • 4 steps

Flags

0

  • BackHP Pavilion DV9700

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RAM               
  • Turn the device over so that the bottom is facing upward.
  • Locate the three panels near the bottom half of the device.
  • The middle-most panel is the one we will be focusing on.
  • Using a Philips #0 screwdriver, unscrew the two 4mm screws that hold this panel in place.

Turn the device over so that the bottom is facing upward.

Locate the three panels near the bottom half of the device.

The middle-most panel is the one we will be focusing on.

Using a Philips #0 screwdriver, unscrew the two 4mm screws that hold this panel in place.

1024

Step 2

  • Pull the bottom of the panel upward.
  • Then pull the panel toward yourself to remove.

Pull the bottom of the panel upward.

Then pull the panel toward yourself to remove.

Step 3

  • Look toward the top half of the exposed compartment.
  • Each ram stick will have two silver clips on the left and right side.
  • Push these clips outward at the same time to release the ram stick.

Look toward the top half of the exposed compartment.

Each ram stick will have two silver clips on the left and right side.

Push these clips outward at the same time to release the ram stick.

Step 4

  • The ram stick will be held at a 45 degree angle. Pull the stick upward to release it from the slot.
  • Each ram stick will have a notch near the bottom, make sure to keep note of which side this notch is on.
  • Make sure to place the ram away from any static surfaces (carpet, fabric, etc.)

The ram stick will be held at a 45 degree angle. Pull the stick upward to release it from the slot.

Each ram stick will have a notch near the bottom, make sure to keep note of which side this notch is on.

Make sure to place the ram away from any static surfaces (carpet, fabric, etc.)

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Max Shangraw                     

Member since: 03/19/2018

507 Reputation

                                      4 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team S6-G1, Bernier Spring 2018                        

                                                  Member of UMass Dartmouth, Team S6-G1, Bernier Spring 2018 



                    UMASSD-BERNIER-S18S6G1                     


                                            3 Members                     


                                            4 Guides authored