Hp Pavilion Dv9000 Wireless Card Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
2 steps
Wireless Card
3 steps

Flags

BackHP Pavilion dv9000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn the laptop over to expose the bottom side.
Locate the battery removal switch next to the battery compartment
Important: Before doing any repairs on the laptop, make sure it is completely powered down and unplugged.

Turn the laptop over to expose the bottom side.

Locate the battery removal switch next to the battery compartment

Important: Before doing any repairs on the laptop, make sure it is completely powered down and unplugged.

1024

Step 2

              Battery Removal

Slide the switch all the way to the left to release the battery. The battery should pop up.
Lift the battery out.

Slide the switch all the way to the left to release the battery. The battery should pop up.

Lift the battery out.

Step 3

              Wireless Card

Locate the panel that lies in the front center of the laptops underside.
Using a Phillips #1 screwdriver, remove the two 5mm screws on the forward end of the cover.
Lift off the cover to expose the Wi-Fi card underneath.

Locate the panel that lies in the front center of the laptops underside.

Using a Phillips #1 screwdriver, remove the two 5mm screws on the forward end of the cover.

Lift off the cover to expose the Wi-Fi card underneath.

Step 4

Locate the Wi-Fi card inside of the computer.
With a Phillips #1 screwdriver, remove the two 11mm screws on either side of the wires attached to the top of the Wi-Fi card.
Lift the card from its resting location. Be careful, the card and attached wires are fragile.

Locate the Wi-Fi card inside of the computer.

With a Phillips #1 screwdriver, remove the two 11mm screws on either side of the wires attached to the top of the Wi-Fi card.

Lift the card from its resting location. Be careful, the card and attached wires are fragile.

Step 5

Carefully pop the wires off of the Wi-Fi card. They should easily come off with a light tug.
As you take each wire off, keep track of the numbered labels. These numbers correspond with contact points on the card.

Carefully pop the wires off of the Wi-Fi card. They should easily come off with a light tug.

As you take each wire off, keep track of the numbered labels. These numbers correspond with contact points on the card.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Erik Hoffnagle

Member since: 04/11/2013

747 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Cal Poly, Team 10-32, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 10-32, Maness Winter 2014 



                    CPSU-MANESS-W14S10G32                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team