Hp Pavilion Dv7 3065Dx Ram Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          8 minutes            

Sections

2

• Battery
• 3 steps
• RAM
• 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHP Pavilion dv7-3065dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off the device before removing the battery.
• Place the laptop upside down on a flat surface so that the bottom is facing up.
• The battery is the long rectangle above the latch.

Turn off the device before removing the battery.

Place the laptop upside down on a flat surface so that the bottom is facing up.

The battery is the long rectangle above the latch.

1024

Step 2

• Slide the battery latch to the left to release the battery.

Slide the battery latch to the left to release the battery.

Step 3

• Carefully pull out the battery while holding the latch to the open position with your finger.

Carefully pull out the battery while holding the latch to the open position with your finger.

Step 4

              RAM               

• Remove the four circled screws using a #1 philips head screwdriver
• Note: Be sure to leave the screws in the pannel
• Pry off cover and place to the side.

Remove the four circled screws using a #1 philips head screwdriver

Note: Be sure to leave the screws in the pannel

Pry off cover and place to the side.

Step 5

• The RAM modules will be found on the right side of the access panel
• CAUTION - The RAM modules are sensitive to electrostatic discharge. It is recommended to wear an anti static bracelet while handling the RAM.

The RAM modules will be found on the right side of the access panel

CAUTION - The RAM modules are sensitive to electrostatic discharge. It is recommended to wear an anti static bracelet while handling the RAM.

Step 6

• To remove RAM modules, pry metal tabs out of the modules, and pull ram out (Starting from the top RAM module).
• Note: The RAM Modules pop out away from the motherboard. In order to replace them, slot the gold plated end into the terminal and push down towards the motherboard.

To remove RAM modules, pry metal tabs out of the modules, and pull ram out (Starting from the top RAM module).

Note: The RAM Modules pop out away from the motherboard. In order to replace them, slot the gold plated end into the terminal and push down towards the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Jonathan Winkler                     

Member since: 02/06/2017

161 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Ohio State, Team 1-5, Wilder Spring 2017                        

                                                  Member of Ohio State, Team 1-5, Wilder Spring 2017 



                    OSU-WILDER-S17S1G5                     


                                            4 Members                     


                                            5 Guides authored