Difficulty
Moderate
Steps
11
Time Required
15 minutes
Sections
3
- Battery
- 1 step
- Back Plate
- 2 steps
- Wifi Card
- 8 steps
Flags
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackHP Pavilion dv7-1285dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Ensure the device is powered down and unplugged.
- Turn the device upside down with the battery compartment facing you.
- Slide the black slider to the right and lift the battery out of its compartment.
Ensure the device is powered down and unplugged.
Turn the device upside down with the battery compartment facing you.
Slide the black slider to the right and lift the battery out of its compartment.
1024
Step 2
Back Plate
- Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.
- These screws do not completely detach from the device when unscrewed.
Locate and remove the six Phillips PM2.5×7.0 screws around the perimeter of the back plate.
These screws do not completely detach from the device when unscrewed.
Step 3
- Use the plastic opening tool to lift up the back plate and set it aside.
Use the plastic opening tool to lift up the back plate and set it aside.
Step 4
Wifi Card
- Locate the wifi card to the right of the RAM.
Locate the wifi card to the right of the RAM.
Step 5
- Unplug antenna cables 1 and 2 from their leads.
- Antenna cable 3 is not used.
Unplug antenna cables 1 and 2 from their leads.
Antenna cable 3 is not used.
Step 6
- Remove the two Phillips head screws located on the battery compartment side of the wifi card.
Remove the two Phillips head screws located on the battery compartment side of the wifi card.
Step 7
- Gently lift the wifi card up to a 45 degree angle from the side with screws.
Gently lift the wifi card up to a 45 degree angle from the side with screws.
Step 8
- Unplug the wifi card.
Unplug the wifi card.
Step 9
- These next steps are for installing your replacement wifi card. These steps are very important to ensure that you do not damage your device.
- Fully insert the replacement wifi card at a 45 degree angle, ensuring that the notch on the card lines up with the peg on the plug.
These next steps are for installing your replacement wifi card. These steps are very important to ensure that you do not damage your device.
Fully insert the replacement wifi card at a 45 degree angle, ensuring that the notch on the card lines up with the peg on the plug.
Step 10
- Gently push the wifi card down until the screws can be replaced.
Gently push the wifi card down until the screws can be replaced.
Step 11
- Connect the antenna cable 1 with lead 1 and connect antenna cable 2 with lead 2.
- Wire 1 needs to be connected to lead 1 and wire 2 needs to be connected to lead 2.
- Wire 3 and lead 3 are not used.
Connect the antenna cable 1 with lead 1 and connect antenna cable 2 with lead 2.
Wire 1 needs to be connected to lead 1 and wire 2 needs to be connected to lead 2.
Wire 3 and lead 3 are not used.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Anmol Mathur
Member since: 04/14/2014
291 Reputation
2 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 12-34, Maness Spring 2014
Member of Cal Poly, Team 12-34, Maness Spring 2014
CPSU-MANESS-S14S12G34
4 Members
7 Guides authored