Hp Pavilion Dv6000 Wireless Card Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          10 - 15 minutes            

Sections

1

• Wireless Card
• 4 steps

Flags

0

• BackHP Pavilion dv6000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Wireless Card               

• Lay the laptop on a flat surface, battery side up.
• Remove the two screws securing the RAM shield to the lower case.
• The screws will remain captive within the shield.
• Lift and remove the RAM shield up from the lower case.

Lay the laptop on a flat surface, battery side up.

Remove the two screws securing the RAM shield to the lower case.

The screws will remain captive within the shield.

Lift and remove the RAM shield up from the lower case.

1024

Step 2

• Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.
• Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

Step 3

• Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.
• Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.
• Grasp the wireless card and pull it straight out of its socket on the motherboard.

Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

Grasp the wireless card and pull it straight out of its socket on the motherboard.

Step 4

• Wireless card remains.

Wireless card remains.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Ben Hirsch                     

Member since: 10/05/2010

3,826 Reputation

                                      10 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       Cal Poly, Team 21-33, Regan Fall 2010                        

                                                  Member of Cal Poly, Team 21-33, Regan Fall 2010 



                    CPSU-REGAN-F10S21G33                     


                                            4 Members                     


                                            12 Guides authored