Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

  • Speaker Bar
  • 4 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Pavilion dv6000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Speaker Bar
  • Make sure the laptop lid is closed, turn it over and remove the battery by moving the switch right to left.
  • there are three philips screws located on the surface where the writing is. remove those three screws.

Make sure the laptop lid is closed, turn it over and remove the battery by moving the switch right to left.

there are three philips screws located on the surface where the writing is. remove those three screws.

1024

Step 2

  • turn the laptop right side up. Between the cover and case on the top right of the laptop and using a plastic sludger or a finger lift gently on the speaker cover as to disengage the clips.
  • Be sure not to pull hard or you may damage the ribbon cables.
  • From the side closest to the screen turn the cover towards yourself.

turn the laptop right side up. Between the cover and case on the top right of the laptop and using a plastic sludger or a finger lift gently on the speaker cover as to disengage the clips.

Be sure not to pull hard or you may damage the ribbon cables.

From the side closest to the screen turn the cover towards yourself.

Step 3

  • there is one connector from the speaker bar to a control board. Gently remove the cable.
  • There are two more screws attaching the speaker bar to the cover, remove these and take the speaker bar out.

there is one connector from the speaker bar to a control board. Gently remove the cable.

There are two more screws attaching the speaker bar to the cover, remove these and take the speaker bar out.

Step 4

  • you are now ready to replace or repair the speaker bar. I recomend purchasing a new one, they range anywhere from 5-15 dollars online.

you are now ready to replace or repair the speaker bar. I recomend purchasing a new one, they range anywhere from 5-15 dollars online.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    Joba Fett

Member since: 04/11/2014

227 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

kingsley Osunkwo - Dec 5, 2017

Reply

how to fix speaker from board

fernando mancini - Sep 13, 2022

Reply

Grazie siete bravissimi . Ce ne fossero persone come voi che altruisticamente mettono a disposizione la loro esperienza di riparazioni per gli altri!

Fernando Mancini