Difficulty
Easy
Steps
9
Time Required
10 minutes
Sections
1
- Hard Drive
- 9 steps
Flags
0
BackHP Pavilion Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Hard Drive
- Make sure the laptop is turned off, and the power cable is removed.
- Leaving the laptop turned on can cause damage to the hardware and any stored data.
Make sure the laptop is turned off, and the power cable is removed.
Leaving the laptop turned on can cause damage to the hardware and any stored data.
1024
Step 2
- Turn the laptop over to access the backside of the computer.
- Identify and confirm that the laptop is an HP Pavilion DV5T-1000.
Turn the laptop over to access the backside of the computer.
Identify and confirm that the laptop is an HP Pavilion DV5T-1000.
Step 3
- Slide the battery lock to the left, it’s located just below the battery compartment.
- Pull the battery up and out, to remove it from the battery compartment.
- To prevent hardware damage, remove the battery before working on the laptop.
Slide the battery lock to the left, it’s located just below the battery compartment.
Pull the battery up and out, to remove it from the battery compartment.
To prevent hardware damage, remove the battery before working on the laptop.
Step 4
- Identify the hard drive compartment, located at the top left-hand frame of the laptop.
Identify the hard drive compartment, located at the top left-hand frame of the laptop.
Step 5
- In order to remove the hard drive compartment cover, first remove the two screws located on the panel, using a size 0 Phillips head screwdriver.
In order to remove the hard drive compartment cover, first remove the two screws located on the panel, using a size 0 Phillips head screwdriver.
Step 6
- Expose the hard drive by lifting the drive cover.
Expose the hard drive by lifting the drive cover.
Step 7
- In order to loosen the hard drive from the motherboard, tug gently on the black tabs located at both ends of the hard drive.
- Be cautious when handling the cable that connects the hard drive to the computer’s motherboard.
In order to loosen the hard drive from the motherboard, tug gently on the black tabs located at both ends of the hard drive.
Be cautious when handling the cable that connects the hard drive to the computer’s motherboard.
Step 8
- Firmly hold both the black plug, and the hard drive itself to separate the drive from the cable.
Firmly hold both the black plug, and the hard drive itself to separate the drive from the cable.
Step 9
- Remove the 4 screws using a size 0 Phillips head screwdriver.
- Remove the metal from the perimeter of the hard drive.
Remove the 4 screws using a size 0 Phillips head screwdriver.
Remove the metal from the perimeter of the hard drive.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Author
with 6 other contributors
Josh Taimanglo
Member since: 09/21/2015
147 Reputation
1 Guide authored
Badges:
9
+6 more badges
Team
Colorado Springs, Team 6-5, Mcmichael Fall 2015
Member of Colorado Springs, Team 6-5, Mcmichael Fall 2015
UCCS-MCMICHAEL-F15S6G5
4 Members
1 Guide authored
Bettyjean Serrano - Mar 23, 2022
Reply
Help after replacing hard drive installation of windows