Difficulty

Easy

Steps

5

Time Required

                          5 minutes

Sections

4

  • Battery
  • 1 step
  • RAM Cover
  • 1 step
  • Wifi Card
  • 2 steps
  • RTC Battery
  • 1 step

Flags

0

  • BackHP Pavilion dv5000

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn off the computer, and unplug it from all external power sources.
  • Lay the computer face-down on a flat surface. Orient the computer to match the image.
  • Locate the battery release switch, as indicated in the image by the red rectangle. Slide the switch from right to left, and remove the battery.

Turn off the computer, and unplug it from all external power sources.

Lay the computer face-down on a flat surface. Orient the computer to match the image.

Locate the battery release switch, as indicated in the image by the red rectangle. Slide the switch from right to left, and remove the battery.

1024

Step 2

              RAM Cover
  • Remove the two 5mm Phillips screws on the right side of the RAM cover.
  • Lift the right side of the RAM cover, and remove it.

Remove the two 5mm Phillips screws on the right side of the RAM cover.

Lift the right side of the RAM cover, and remove it.

Step 3

              Wifi Card
  • Disconnect the antenna leads from the wifi card by lifting the gold ends of the wires off the prongs on the wifi card.
  • The white wire connects to the AUX terminal.
  • The black wire connects to the MAIN terminal.

Disconnect the antenna leads from the wifi card by lifting the gold ends of the wires off the prongs on the wifi card.

The white wire connects to the AUX terminal.

The black wire connects to the MAIN terminal.

Step 4

  • Remove the two 6.0mm Phillips screws from the wifi card.
  • Remove the wifi card.

Remove the two 6.0mm Phillips screws from the wifi card.

Remove the wifi card.

Step 5

              RTC Battery
  • Remove the RTC Battery from the battery holder.

Remove the RTC Battery from the battery holder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 11 other contributors 


                    Farid Khoshnevissan

Member since: 10/11/2010

805 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 21-34, Regan Fall 2010                        

                                                  Member of Cal Poly, Team 21-34, Regan Fall 2010 



                    CPSU-REGAN-F10S21G34                     


                                            4 Members                     


                                            11 Guides authored