Difficulty
Easy
Steps
10
Time Required
15 - 20 minutes
Sections
3
- Battery
- 3 steps
- Hard Drive
- 4 steps
- CD/DVD Drive
- 3 steps
Flags
0
BackHP Pavilion dv4000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Turn the laptop upside down with the battery compartment facing you.
Turn the laptop upside down with the battery compartment facing you.
1024
Step 2
- Slide the battery release latch to the right and hold in place.
Slide the battery release latch to the right and hold in place.
Step 3
- Lift the front edge of the battery up and remove it from the compartment.
Lift the front edge of the battery up and remove it from the compartment.
Step 4
Hard Drive
- Orient the laptop with the hard drive panel towards you.
Orient the laptop with the hard drive panel towards you.
Step 5
- Unscrew the two 2x5mm screws with a #00 Phillips screwdriver.
Unscrew the two 2x5mm screws with a #00 Phillips screwdriver.
Step 6
- Lift the cover up by the tab near the screws.
- The cover can be removed from the laptop.
Lift the cover up by the tab near the screws.
The cover can be removed from the laptop.
Step 7
- Grab the hard drive from the sides and slide it away from the connectors.
- The hard drive should disconnect with light force. If it doesn’t easily slide out, ensure there are no cables or obstacles preventing it from moving.
- Lift and remove the hard drive from the laptop.
- We did not have a hard drive in our laptop to demonstrate how to remove it.
Grab the hard drive from the sides and slide it away from the connectors.
The hard drive should disconnect with light force. If it doesn’t easily slide out, ensure there are no cables or obstacles preventing it from moving.
Lift and remove the hard drive from the laptop.
We did not have a hard drive in our laptop to demonstrate how to remove it.
Step 8
CD/DVD Drive
- Locate the one 2x5 mm screw in the hard drive bay.
- Unscrew the screw with a #00 Phillips screwdriver.
Locate the one 2x5 mm screw in the hard drive bay.
Unscrew the screw with a #00 Phillips screwdriver.
Step 9
- Locate the hole next to the DVD drive release button.
- Insert a paperclip into the hole to release the DVD drive.
Locate the hole next to the DVD drive release button.
Insert a paperclip into the hole to release the DVD drive.
Step 10
- Carefully grasp the DVD drive and slide it out.
Carefully grasp the DVD drive and slide it out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Nick LaMarche
Member since: 10/18/2016
349 Reputation
2 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team 4-2, Catania Fall 2016
Member of UMass Dartmouth, Team 4-2, Catania Fall 2016
UMASSD-CATANIA-F16S4G2
3 Members
6 Guides authored